Contact & Support: +44 (0)1592 655428
$0.00
0
Specialist Live Chat
Coaxial Cable Calculator
Enquiry Form
Home  ›  Products  ›  Coaxial Cables  ›  LMR Cable  ›  LMR  ›  LMR-195-FR-W
 

LMR®-195-FR-W

$3.03 EX VAT

$0.92 per foot EX VAT
  • GBP: £2.32

LMR-195-FR-W is a non-halogen (non-toxic), low smoke, fire retardant, white jacketed cable designed for in-building runs that can be routed anywhere except air handling plenums.

Meters
SKU: LMR-195-FR-W Category:

Description

LMR-195-FR-W

LMR-195-FR-W is a non-halogen (non-toxic), low smoke, fire retardant, white jacketed cable designed for in-building runs that can be routed anywhere except air handling plenums. LMR-FR is UL/NEC & CSA rated ‘CMR’ and ‘FT4’ respectively, meets FAA FAR25 requirements and is MSHA-P for mining applications.

LMR-195-FR-W has excellent reliability, unsurpassed flexibility and ultra low attenuation. The LMR-195-FR-W cable is a drop in performance upgrade for RG-58 and RG-142. This means the LMR-195-FR cable has similar mechanical specifications however the electrical performance is much higher.

How is the LMR-195-FR-W performance higher than competing RG cables?

This is achieved due to the cable construction specifications. The centre conductor uses a high conductivity, Bare copper clad covered aluminium centre conductor material. The dielectric is nitrogen injected, foamed, closed cell, Polyethylene which helps achieve 80% Velocity of Propagation. The Dielectric has a Aluminium foil outer conductor, which is chemically bonded on to it. Due to the cable construction, The attenuation is significantly lower and VP is higher as compared to single shielded RG coaxial cables.

LMR-195-FR-W =80% VP

RG-58= 66% VP

RG-142= 69% VP

Outer Jacket

The LMR-195-FR-W comes with a white, fire retardant, low smoke, zero halogen, FRPE Jacket. The cable can be used indoors and outdoors and is designed to last 20 years of service.

Frequency Operating Band

LMR-195-FR-W is designed to operate excellent from DC – 6GHz. For any frequency band at VHF and above LMR is the obvious choice.

 Applications

LMR-195-FR-W Flexible Low Loss Communications Coaxial Cable is ideal for:
  • Jumper Assemblies in Wireless Communications Systems
  • Short Antenna Feeder runs
  • WLL
  • GPS
  • LMR
  • WLAN
  • WISP
  • WiMAX
  • SCADA
  • Radio antennas or receivers
  • TVRO
  • Mobile Antennas
  • Indoor and outdoor applications

Attenuation dB figures per 100m

30 MHz : 6.5dB
50 MHz : 8.4dB
150 MHz : 14.6dB
220 MHz : 17.7dB
450 MHz : 25.5dB
900 MHz : 36.5dB
1500 MHz : 47.7dB
1800 MHz : 52.5dB
2000 MHz: 55.4dB
2500 MHz: 62.4dB
5800 MHz: 98.1dB
8000 MHz: 117.1dB

Temperature range: -40⁰C – +85⁰C 

Inner Conductor: Solid BC (0.94mm)
Dielectric: Foam PE (2.79mm)
Outer conductor: Aluminium tape (2.95mm)
Overall Braid: Tinned copper (3.53mm)
Jacket: White FRPE (4.95mm)

Mechanical Specifications

Bend Radius: installation 12.7mm
Bend Radius: repeated 50.8mm
Bending Moment: 0.27Nm
Weight lb/ft  0.03Kg/M
Tensile Strength  18.2Kg
Flat Plate Crush: 0.27Kg/mm

Connectors

At McGill Microwave systems, we supply a huge range of connectors that include all the common interface modes. The connectors come in EZ style fitment, for rapid solderless assembly or the traditional TC solder type connectors.
LMR-195    ‘TC’ (solder center pin) Connectors
TC-195-NMH-X N-Male (plug) crimp connector, no braid trim
TC-195-NMH-RA-D N-Male (plug) crimp right angle connector
TC-195-SM-SS-X SMA-Male (plug) crimp connector, no braid trim
TC-195-TM-X TNC-Male (plug) crimp connector; no braid trim
LMR-195    ‘EZ’ (non solder center pin) Connectors
EZ-195/200-4310M-X 4.3/10-male (plug) crimp connector, non-solder pin, no braid trim
EZ-195/200-4310M-RA-X 4.3/10-male (plug) right angle, crimp connector, non-solder pin, no braid trim
EZ-195-BM-X BNC Male (plug) crimp connector, non-solder pin, no braid trim
EZ-195/200-716M-X 7/16-male (plug) crimp connector, non-solder pin, no braid trim
EZ-195/200-716M-RA-X 7/16-male (plug) right angle, crimp connector, non-solder pin, no braid trim
EZ-195/200-NF-X N-female (jack) crimp connector, non-solder pin, no braid trim
EZ-195-NF-BH-X N-female (jack) bulkhead crimp connector, non-solder pin, no braid trim
EZ-195-NMH-X N-male (plug) crimp connector, non-solder pin, no braid trim
EZ-195-QF-X QMA-female (plug) crimp connector, non-solder pin, no braid trim
EZ-195-QM-X QMA-male (plug) crimp connector, non-solder pin, no braid trim
EZ-195/200-QNF-X QN-female (jack) crimp connector, non-solder pin, no braid trim
EZ-195/200-QNM-X QN-male (plug) crimp connector, non-solder pin, no braid trim
EZ-195/200-QNM-RA-X QN-male (plug) right angle, crimp connector, non-solder pin, no braid trim
EZ-195/200-SF-X SMA-female (jack) crimp connector, non-solder pin, no braid trim
EZ-195-SM-X SMA-Male (plug) crimp connector, non-solder pin, no braid trim
EZ-195-SM-RA-X SMA-Male (plug) crimp connector, non-solder pin, right angle, no braid trim
EZ-195/200-TF-BH-X TNC-female (jack) bulkhead, crimp connector, non-solder pin, no braid trim
EZ-195-TM-X TNC-male (plug) crimp connector, non-solder pin, no braid trim
EZ-195/200-TM-RA-X TNC-male (plug) right angle, crimp connector, non-solder pin, no braid trim
EZ-195-TF-RP-X TNC-female (jack) reverse polarity crimp connector, non-solder pin, no braid trim
EZ-195-TM-RP-X TNC-male (plug) reverse polarity crimp connector, non-solder pin, no braid trim
EZ-195/200-UM-X UHF-male (plug) crimp connector, non-solder pin, no braid trim
EZ-195/200-UM-RA-X UHF-male (plug) right angle, crimp connector, non-solder pin, no braid trim

Installing LMR-195-FR-W Connectors

Installing the LMR EZ connector range is the easiest in the business. Detailed instructions come with the connector, however, to ensure you achieve the correct strip length every time, with minimum effort, we have you covered. You can use our TK-195/200EZ Cable assembly tool kit. The tool kit consists of a CST-195 strip tool, CT-240/200/195/100 crimp tool and a CCT-03 Cutting tool.

tk-195/200

Specification

ApplicationIndoor/Outdoor Riser CMR
cable od (in)0.195
cable od (mm)4.95
JacketFRPE
Jacket colorWhite
weight lb/ft0.021
weight kg/m0.03
operating temperature range (f)-40 to +185
operating temperature range (c)-40 to +85
bending moment (ft-lb)0.2
bending moment (mm)0.27
Nato_Codes6145-01-612-1749
woosvi_sluga:1:{i:0;a:1:{s:4:"imgs";a:2:{i:0;s:5:"20303";i:1;s:5:"20302";}}}

Brand

LMR

LMR™ is recognised as the global brand name of the Industry standard, Flexible, Low Loss Communications Coaxial cable family designed and manufactured by Times Microwave Systems USA. LMR™ is also the brand name for the market leading, Times Microwave Systems range of  high performance coaxial connectors such as the 'TC' and 'EZ' connectors . These connectors are known internationally as the easiest coaxial connectors to terminate to flexible coaxial cables in the industry – with consistent resulting superior broadband Insertion Loss and VSWR performance. LMR™ is a registered trademark of Times Microwave Systems USA.

datasheet

Download

Connectors

Installation Tools

The following Hardware and Installation tools are compatible

  • CCT-02

    CCT-02 Cutting Tool

    Part NumberCCT-02
    Stock Code3192-165

    CCT-02 Cutting Tool

    The CCT-02 cutting tool is designed to give a neat cut to any of the sizes of the below coaxial cables: The Blade is hardened, ensuring there is minimum wear over time.
    Add to Cart
  • CCT-03

    CCT-03 Cutting Tool

    Part NumberCCT-03
    Stock Code3192-267

    CCT-03 Cable Cutting Tool

    The CCT-03 tool is an efficient tool for cutting LMR, TCOM and RG cables having a diameter of LMR-600 or smaller. This tool provides a clean, square cut - leaving the the cable cut perfectly round. This cutting tool has been specially designed with a perfect spring force already built in to the tool to cut the cable. All the user needs to do is simply spin the tool, and it cuts the cable perfectly itself, every time. The Cutting tool comes with hardened blade, that allows 1000’s of cable cuts, with no degradation to the blade.
    Add to Cart
  • cst-195/200

    CST-195/200 Prep Tool

    Part NumberCST-195/200
    Stock Code3192-102
    CST-195/200 Cable Prep Tool
    The CST-195/200 manufactured by Times Microwave Systems and is designed to Strip all variations of LMR-195 and LMR-200 cable. This tool has 3 features: Cable cut (To centre conductor), Jacket stripper and centre conductor deburring tool. There is also an adjustment setting on the stripping tool to allow to cut for Times Microwave LMR Crimp connectors or Clamp connectors. Simply set it to the correct connector type and start stripping. The Cable Prep Tool has replaceable blades however this should not need to be done regularly as the blades have been proven to have a very long lasting life.
    Add to Cart
  • tk-195/200ez

    TK-195/200EZ

    Part NumberTK-195/200
    Stock Code660-0829

    TK-195/200EZ Cable Assembly Tool kit

    The TK-195/200EZ Cable Assembly Tool Kit has been designed for LMR-195 & LMR-200 crimp and clamp connectors. The tooling in the kit can be used with all LMR-195/200 cables and all LMR-195/200 X series connectors.
    The TK-195/200EZ tool kit consists of the following items:
    • CCT-03 Cable Cutting Tool
    • CST-195/200 Cable Stripping Tool
    • CT-240/200/195/100 Crimping Tool
    • Black Tool Bag
    CCT-03 Cutting tool
    The CCT-03 cutting tool, included in the TK-195/200EZ Tool Kit, is the first tool used to cut the LMR coaxial cable. This has been specially designed with a perfect spring force already built in to the tool to cut the cable. All the user needs to do is simply spin the tool, and it cuts the cable perfectly itself, every time. The CCT-03 cutting tool has a hardened blade, that allows 1000’s of cable cuts, with no degradation to the blade. The CCT-03 cutting tool is designed to cut from LMR-100 – LMR-600.
    CST-195/200 Cable Stripping Tool
    The CST-195/200 Cable Stripping Tool, included in the TK-195/200EZ Tool Kit, is the second tool used to strip the LMR coaxial cable. This tool has 3 features: Cable cut (To centre conductor), Jacket stripper and centre conductor deburring tool. There is also an adjustment setting on the stripping tool to allow to cut for Times Microwave LMR Crimp connectors or Clamp connectors. This avoids having to take the time to read instructions and measure. Simply set it to the correct connector type and start stripping!
    CT-240/200/195/100 Crimp Tool 
    The CT-240/200/195/100 Crimp Tool, included in the TK-195/200EZ Tool Kit is the final tool used to crimp the connector on to the LMR-195 & 200 coaxial cable. The Crimp Tool has been specifically designed with ultra strong dies that never wear over time. The dies are made to a very fine tolerance, specifically designed for LMR-195 & 200 X Series connectors. The result from using the CT-240/200/195/100 crimp tool is the perfect crimp, every time, with no tool degradation.
    Add to Cart

  • Replacement Blade Kit

    Part NumberRB-CST
    Stock Code3192-086
    Replacement blade kit for all CST cutting tools
    Add to Cart

  • Replacement Blade

    Part NumberRB-02
    Stock Code3192-166
    Replacement blade for cutting tool
     
    Add to Cart