Description
LMR-195-LSZH
LMR-195-LSZH Coaxial cable is a very product within the Times Microwave LMR coaxial cable range. The LMR range is recognised globally as the industry standard ultra low loss, flexible, low cost, lightweight, DC – 6GHz coaxial cable solution for many RF applications. This is also backed up by the best warranty and technical support in the business.
Why choose LMR-195-LSZH?
LMR-195-LSZH is a non-halogen (non-toxic), low smoke, fire retardant cable with excellent reliability, unsurpassed flexibility and ultra low attenuation. The LMR-195-LSZH cable has loss figures comparable to the extremely rigid corrugated coaxial cables however manages to achieve similar flexibility to that of high loss RG Cables. LMR-195 is around 40% lower attenuation than competing RG Air-Dielectric type Cables.
How is the LMR-195-LSZH low loss figures achieved?
This is achieved due to the cable construction specifications. The centre conductor uses a high conductivity, Bare copper clad covered aluminium centre conductor material. The dielectric is nitrogen injected, foamed, closed cell, Polyethylene which helps achieve 80% Velocity of Propagation. The Dielectric has a Aluminium foil outer conductor, which is chemically bonded on to it. Due to the cable construction, The attenuation is significantly lower as compared to single shielded coaxial cables.
LMR-195 =80% VP
RG-58= 66% VP
RG-142= 69% VP
Outer Jacket
All LMR-LSZH coaxial cables comes with a UV resistant, FRPE Jacket. This helps to ensure the cable jacket can withstand harsh outside environments and UV rays from sunlight, as well as being suitable for indoor use due to the jacket being zero halogen (non-toxic), low smoke & fire retardant.
Flame Meets the following certifications:
- EC-332-1-2
- IEC 332-3 CAT.C
- UL-VW1
- UL-1581
- IEE-383
- BS-4066-1
- BS-4066-3
- UL-1685
- NFPA-130
Smoke meets the following certifications:
- IEC-61034-2
- NES-711
Halogen Meets the following certifications:
- IEC-60754-1
- BS 6425-1
- IEC-60754-2
- BS 6425-2
Frequency Operating Band
LMR-195-LSZH is designed to operate excellent from DC – 6GHz. For any frequency band at VHF and above LMR is the obvious choice.
Applications
- Jumper Assemblies in Wireless Communications Systems
- Short Antenna Feeder runs
- WLL
- GPS
- LMR
- WLAN
- WISP
- WiMAX
- SCADA
- Radio antennas or receivers
- TVRO
- Mobile Antennas
Attenuation dB figures per 100m
Temperature range: -40⁰C – +85⁰C
Mechanical Specifications
Connectors
LMR-195 ‘TC’ (solder center pin) Connectors | ||
TC-195-NMH-X | N-Male (plug) crimp connector, no braid trim | |
TC-195-NMH-RA-D | N-Male (plug) crimp right angle connector | |
TC-195-SM-SS-X | SMA-Male (plug) crimp connector, no braid trim | |
TC-195-TM-X | TNC-Male (plug) crimp connector; no braid trim | |
LMR-195 ‘EZ’ (non solder center pin) Connectors | ||
EZ-195/200-4310M-X | 4.3/10-male (plug) crimp connector, non-solder pin, no braid trim | |
EZ-195/200-4310M-RA-X | 4.3/10-male (plug) right angle, crimp connector, non-solder pin, no braid trim | |
EZ-195-BM-X | BNC Male (plug) crimp connector, non-solder pin, no braid trim | |
EZ-195/200-716M-X | 7/16-male (plug) crimp connector, non-solder pin, no braid trim | |
EZ-195/200-716M-RA-X | 7/16-male (plug) right angle, crimp connector, non-solder pin, no braid trim | |
EZ-195/200-NF-X | N-female (jack) crimp connector, non-solder pin, no braid trim | |
EZ-195-NF-BH-X | N-female (jack) bulkhead crimp connector, non-solder pin, no braid trim | |
EZ-195-NMH-X | N-male (plug) crimp connector, non-solder pin, no braid trim | |
EZ-195-QF-X | QMA-female (plug) crimp connector, non-solder pin, no braid trim | |
EZ-195-QM-X | QMA-male (plug) crimp connector, non-solder pin, no braid trim | |
EZ-195/200-QNF-X | QN-female (jack) crimp connector, non-solder pin, no braid trim | |
EZ-195/200-QNM-X | QN-male (plug) crimp connector, non-solder pin, no braid trim | |
EZ-195/200-QNM-RA-X | QN-male (plug) right angle, crimp connector, non-solder pin, no braid trim | |
EZ-195/200-SF-X | SMA-female (jack) crimp connector, non-solder pin, no braid trim | |
EZ-195-SM-X | SMA-Male (plug) crimp connector, non-solder pin, no braid trim | |
EZ-195-SM-RA-X | SMA-Male (plug) crimp connector, non-solder pin, right angle, no braid trim | |
EZ-195/200-TF-BH-X | TNC-female (jack) bulkhead, crimp connector, non-solder pin, no braid trim | |
EZ-195-TM-X | TNC-male (plug) crimp connector, non-solder pin, no braid trim | |
EZ-195/200-TM-RA-X | TNC-male (plug) right angle, crimp connector, non-solder pin, no braid trim | |
EZ-195-TF-RP-X | TNC-female (jack) reverse polarity crimp connector, non-solder pin, no braid trim | |
EZ-195-TM-RP-X | TNC-male (plug) reverse polarity crimp connector, non-solder pin, no braid trim | |
EZ-195/200-UM-X | UHF-male (plug) crimp connector, non-solder pin, no braid trim | |
EZ-195/200-UM-RA-X | UHF-male (plug) right angle, crimp connector, non-solder pin, no braid trim |