LMR®- MA is a flexible cable designed specifically for mobile antenna applications. It has a PVC jacket and un-bonded aluminum tape to facilitate end stripping with automated equipment.
$2.09 EX VAT
|cable od (in)||0.195|
|cable od (mm)||4.95|
|operating temperature range (f)||-40 to +185|
|operating temperature range (c)||-40 to +85|
|bending moment (ft-lb)||0.2|
|bending moment (mm)||0.27|
Only logged in customers who have purchased this product may leave a review.
The following Hardware and Installation tools are compatible
CCT-02 Cutting ToolThe CCT-02 cutting tool is designed to give a neat cut to any of the sizes of the below coaxial cables:
CCT-03 Cable Cutting ToolThe CCT-03 tool is an efficient tool for cutting LMR, TCOM and RG cables having a diameter of LMR-600 or smaller. This tool provides a clean, square cut - leaving the the cable cut perfectly round. This cutting tool has been specially designed with a perfect spring force already built in to the tool to cut the cable. All the user needs to do is simply spin the tool, and it cuts the cable perfectly itself, every time. The Cutting tool comes with hardened blade, that allows 1000’s of cable cuts, with no degradation to the blade.
CST-195/200 Cable Prep ToolThe CST-195/200 manufactured by Times Microwave Systems and is designed to Strip all variations of LMR-195 and LMR-200 cable. This tool has 3 features: Cable cut (To centre conductor), Jacket stripper and centre conductor deburring tool. There is also an adjustment setting on the stripping tool to allow to cut for Times Microwave LMR Crimp connectors or Clamp connectors. Simply set it to the correct connector type and start stripping. The Cable Prep Tool has replaceable blades however this should not need to be done regularly as the blades have been proven to have a very long lasting life.
TK-195/200EZ Cable Assembly Tool kitThe TK-195/200EZ Cable Assembly Tool Kit has been designed for LMR-195 & LMR-200 crimp and clamp connectors. The tooling in the kit can be used with all LMR-195/200 cables and all LMR-195/200 X series connectors.
The TK-195/200EZ tool kit consists of the following items:
CCT-03 Cutting toolThe CCT-03 cutting tool, included in the TK-195/200EZ Tool Kit, is the first tool used to cut the LMR coaxial cable. This has been specially designed with a perfect spring force already built in to the tool to cut the cable. All the user needs to do is simply spin the tool, and it cuts the cable perfectly itself, every time. The CCT-03 cutting tool has a hardened blade, that allows 1000’s of cable cuts, with no degradation to the blade. The CCT-03 cutting tool is designed to cut from LMR-100 – LMR-600.
CST-195/200 Cable Stripping ToolThe CST-195/200 Cable Stripping Tool, included in the TK-195/200EZ Tool Kit, is the second tool used to strip the LMR coaxial cable. This tool has 3 features: Cable cut (To centre conductor), Jacket stripper and centre conductor deburring tool. There is also an adjustment setting on the stripping tool to allow to cut for Times Microwave LMR Crimp connectors or Clamp connectors. This avoids having to take the time to read instructions and measure. Simply set it to the correct connector type and start stripping!
CT-240/200/195/100 Crimp ToolThe CT-240/200/195/100 Crimp Tool, included in the TK-195/200EZ Tool Kit is the final tool used to crimp the connector on to the LMR-195 & 200 coaxial cable. The Crimp Tool has been specifically designed with ultra strong dies that never wear over time. The dies are made to a very fine tolerance, specifically designed for LMR-195 & 200 X Series connectors. The result from using the CT-240/200/195/100 crimp tool is the perfect crimp, every time, with no tool degradation.
|Replacement blade kit for all CST cutting tools|
Replacement blade for cutting tool
Can't find an item on our website? Need help selecting the right products? Our sales team are ready to assist you, get in touch with us today and we'll help you find what you're looking for!Contact Us
There are no reviews yet.