LMR-200 Cable Assemblies
At McGill Microwave Systems, we have the capability to supply LMR-200 Cable Assemblies with any combination of Times Microwave connectors.
The LMR-200 cable assemblies – supplied by McGill Microwave Systems, uses the LMR-200 Cable range combined with Times Microwave X Series Tri Metal/Alballoy plated connectors which provide superior broadband VSWR performance.
The Times Microwave Systems LMR Cable Assemblies range is recognised globally as the Industry Standard Ultra Low Insertion Loss, Flexible, Low Cost, Lightweight DC-6 GHz solution for most applications – backed up by the best warranty and technical support in the business.
LMR-200 Coaxial Cable
LMR Coaxial cable is an extremely popular cable in the industry due to its excellent reliability, surpassed flexibility and ultra low attenuation. The LMR cable has loss figures comparable to the extremely rigid corrugated coaxial cables however manages to achieve similar flexibility to that of high loss RG Cables. LMR is around 40% lower attenuation than competing RG single shielded cables.
This is achieved due to the cable construction specifications. The centre conductor uses a high conductivity, Bare copper clad covered aluminium centre conductor material. The dielectric is nitrogen injected, foamed, closed cell, Polyethylene which helps achieve a very high % Velocity of Propagation. The Dielectric has a Aluminium foil outer conductor, which is chemically bonded on to it. Due to the cable construction, The attenuation is significantly lower as compared to single shielded coaxial cables.
LMR-200 Cable Assemblies – Frequency Operating Band
LMR-200 cable assemblies are designed to operate excellent from DC – 6GHz. For any frequency band at VHF and above LMR is the obvious choice.
The Times Microwave X Series, that are used to turn the coaxial cable into an assembly, have been engineered to offer the additional key advantages and features over our competitors’ products:
- Albaloy/Tri-Plate plating – resulting in superior Corrosion/Salt Fog resistance performance.
- No braid trim feature – saves time during termination
- Excellent broadband VSWR performance
- Centre pins plated with substantial 50 micro inches of gold- enhanced mate/de-mate life.
- IP 67 Waterproof rated when used with the Times WSB strain relief Weather Sealing Boots.
- Rugged Design with hex Coupling nut feature on Male connectors -enabling the use of torque tools to ensure proper mating force
- Compatible with Times assembly aid tooling such as CST and CT strip/crimp tools
- Solderless rapid assembly design
- Indelible Laser marked with the Times part number
- Superior pull strength /connector retention designs.
The custom made LMR cable assemblies can be supplied with any available Times Microwave connector on either end of the coaxial cable. Below is a list of the connectors that McGill Microwave Stock and can be installed on your cable of choice:
|LMR-200 ‘TC’ (solder centre pin) Connectors|
|TC-200-BM-X||BM||200||3190-2883||BNC-Male (plug) crimp connector; no braid trim|
|TC-200-MUHF||MUHF||200||3190-444||Mini-UHF (plug) crimp connector|
|TC-200-NMH-X||NM||200||3190-2882||N-Male (plug) crimp connector|
|TC-200-NM-RP||NM-RP||200||3190-959||N-Male (plug) crimp connector, (female pin)|
|TC-200-SM-SS-X||SM||200||3190-2881||SMA-Male (plug) crimp connector no braid trim|
|TC-200-SM-RA-D||SM-RA||200||3190-6428||SMA-Male (plug) right angle,crimp connector no braid trim|
|TC-200-SM-RP||SM-RP||200||3190-327||SMA-Male (plug) crimp/reverse polarity (female pin)|
|TC-200-TF-X||TF||200||3190-2884||TNC-Female (jack) crimp connector, no briad trim|
|TC-200-TMC||TM||200||3190-240||TNC-Male plug) clamp connector|
|TC-200-FMEF-X||FME||200||3190-6249||FME female (jack) crimp connector, solder-pin|
|TC-200-FMEM-X||FME||200||3190-6250||FME male (plug) crimp connector, solder-pin|
|CR-200-X||CR||195/200||3190-6110||Crimp Rings for TC/EZ-195/200 Connectors|
|LMR-200 ‘EZ’ Install (non-solder) Connectors|
|EZ-195/200-4310M-X||4310M||195/200||3190-8092||4.3/10-male (plug) crimp connector, non-solder pin, no braid trim|
|EZ-195/200-4310M-RA-X||4310M-RA||195/200||3190-8093||4.3/10-male (plug) right angle, crimp connector, non-solder pin, no braid trim|
|EZ-200-BF-X||BF||200||3190-6522||BNC-Female (plug) crimp connector, non-solder pin, no braid trim|
|EZ-200-BM-X||BM||200||3190-6433||BNC-Male (plug) crimp connector, non-solder pin, no braid trim|
|EZ-195/200-716M-X||716M||195/200||3190-8102||7/16-male (plug) crimp connector, non-solder pin, no braid trim|
|EZ-195/200-716M-RA-X||716M-RA||195/200||3190-8103||7/16-male (plug) right angle, crimp connector, non-solder pin, no braid trim|
|EZ-200-FM-75-X||FM-75||200||3190-6412||F-Male (plug) crimp connector, non-solder pin, no braid trim|
|EZ-195/200-NF-BH-X||NF-BH||195/200||3190-8007||N-female (jack) bulkhead, crimp connector, non-solder pin, no braid trim|
|EZ-200-NMH-X||NM||200||3190-2886||N-Male (plug) crimp connector (non-solder pin); hex/knurl nut, no braid trim|
|EZ-200-NMH-75-X||NM-75||200||3190-6409||N-Male (plug) crimp connector, non-solder pin, no braid trim|
|EZ-195/200-QNF-X||QNF||195/200||3190-8040||QN-female (jack) crimp connector, non-solder pin, no braid trim|
|EZ-195/200-QNM-X||QNM||195/200||3190-8038||QN-male (plug) crimp connector, non-solder pin, no braid trim|
|EZ-195/200-QNM-RA-X||QNM-RA||195/200||3190-8039||QN-male (plug) right angle, crimp connector, non-solder pin, no braid trim|
|EZ-195/200-SF-X||SF||195/200||3190-8002||SMA-female (jack) crimp connector, non-solder pin, no braid trim|
|EZ-200-SF-SS-X||SF||200||3190-6007||SMA-Female (jack) crimp connector, non-solder pin, no braid trim|
|EZ-200-SM-X||SM||200||3190-6434||SMA-Male (plug) crimp connector, non-solder pin, no braid trim|
|EZ-200-SM-RA-SS-X||SM-RA||200||3190-6006||SMA Male (plug), crimp connector, right angle, no braid trim|
|EZ-195/200-TF-BH-X||TF-BH||195/200||3190-8004||TNC-female (jack) bulkhead, crimp connector, non-solder pin, no braid trim|
|EZ-200-TF-RP||TF-RP||200||3190-793||TNC-Female (jack) crimp/reverse polarity (non-solder male pin)|
|EZ-200-TM-RA-X||TM-RA||200||3190-6008||TNC-Male (plug) crimp connector, right angle, no briad trim|
|EZ-200-TM-X||TM||200||3190-6418||TNC-Male (plug) crimp connector, non-solder pin, no braid trim|
|EZ-195/200-TM-RA-X||TM-RA||195/200||3190-8003||TNC-male (plug) right angle, crimp connector, non-solder pin, no braid trim|
|EZ-200-TM-RP||TM-RP||200||3190-792||TNC-Male (plug) crimp/reverse polarity (non-solder female pin)|
|EZ-195/200-UM-X||UM||195/200||3190-8005||UHF-male (plug) crimp connector, non-solder pin, no braid trim|
|EZ-195/200-UM-RA-X||UM-RA||195/200||3190-8006||UHF-male (plug) right angle, crimp connector, non-solder pin, no braid trim|
|CR-200-X||CR||195/200||3190-6110||Crimp Rings for TC/EZ-195/200 Connectors|
Weather Sealing, Strain Relief Boots
When any of our LMR Cable assemblies are used with our WSB weather sealing strain relief boots, the assembly becomes IP67 Rated. This gives extra assurance by fully mitigating any risk of dust ingress and is fully Protected from immersion in water between 15 centimetres and 1 meter in depth.
The soft silicone boot weatherproofing kits replace older weatherproofing methods. The WSB™ weather seal strain relief boots are IP67 rated and are both RoHS and REACH Compliant.
The Weather sealing boots has ribs built in and snap on to our Times Microwave connectors, which also have ribs. This created an excellent, water tight, labyrinth seal effect, which gives excellent sealing abilities.
LMR-200 Cable Assemblies – Low Prices!
There’s even more great news! At McGill Microwave, we mange to keep our prices extremely competitive, with added lightning fast delivery time.