Contact & Support: +44 (0)1592 655428
$0.00
0
Specialist Live Chat
Coaxial Cable Calculator
Enquiry Form
Home  ›  Products  ›  Coaxial Cables  ›  LMR Cable  ›  LMR  ›  LMR-200-PVC
 

LMR®-200-PVC

P.O.A

LMR-200-PVC cable, Manufactured by Times Microwave systems is designed for low loss general-purpose applications and is more flexible than the standard polyethylene jacketed LMR-200 cable.

Meters
SKU: LMR-200-PVC Category:

Description

LMR-200-PVC

LMR-200-PVC cable, Manufactured by Times Microwave systems is designed for low loss general-purpose applications and is more flexible than the standard polyethylene jacketed LMR-200.

The LMR range is recognised globally as the industry standard ultra low loss, flexible, low cost, lightweight, DC – 6GHz coaxial cable solution for many RF applications. This is also backed up by the best warranty and technical support in the business.

Why choose LMR-200-PVC?

LMR-200-PVC has excellent reliability, unsurpassed flexibility and ultra low attenuation. The LMR-200-PVC cable is a drop in performance upgrade for RG-58 and RG-142. This means the LMR-195-PVC cable has similar mechanical characteristics however the electrical performance is much higher.

How is the LMR-200-PVC performance higher than competing RG cables?

This is achieved due to the cable construction specifications. The centre conductor uses a high conductivity, Bare copper clad covered aluminium centre conductor material. The dielectric is nitrogen injected, foamed, closed cell, Polyethylene which helps achieve 80% Velocity of Propagation. The Dielectric has a Aluminium foil outer conductor, which is chemically bonded on to it. Due to the cable construction, The attenuation is significantly lower and VP is higher as compared to single shielded RG coaxial cables.

LMR-200-PVC =80% VP

RG-58= 66% VP

RG-142= 69% VP

Frequency Operating Band

LMR-200-PVC is designed to operate excellent from DC – 6GHz. For any frequency band at VHF and above LMR is the obvious choice.

Should you find your RF system operates at above 1GHz, LMR is once again, your best option, as RG cable typically isn’t compatible with any frequency in excess of 1GHz.

 Applications

LMR-200-PVC Flexible Low Loss Communications Coaxial Cable is ideal for:
  • Jumper Assemblies in Wireless Communications Systems
  • Short Antenna Feeder runs
  • WLL
  • GPS
  • LMR
  • WLAN
  • WISP
  • WiMAX
  • SCADA
  • Radio antennas or receivers
  • TVRO
  • Mobile Antennas

Attenuation dB figures per 100m

30 MHz : 5.8dB
50 MHz : 7.5dB
150 MHz : 13.1dB
220 MHz : 15.9dB
450 MHz : 22.8dB
900 MHz : 32.6dB
1500 MHz : 42.4dB
1800 MHz : 46.6dB
2000 MHz: 49.3dB
2500 MHz: 55.4dB
5800 MHz: 86.5dB
8000 MHz: 102.8dB

Temperature range: -40⁰C – +85⁰C 

Inner Conductor: Solid BC (1.12mm)
Dielectric: Foam PE (2.95mm)
Outer conductor: Aluminium tape (3.07mm)
Overall Braid: Tinned copper (3.66mm)
Jacket: Black PVC (4.95mm)

Mechanical Specifications

Bend Radius: installation 12.7mm
Bend Radius: repeated 50.8mm
Bending Moment: 0.27Nm
Weight  0.03Kg/M
Tensile Strength  48Kg
Flat Plate Crush: 0.27Kg/mm

LMR-200 Connectors

LMR-200    ‘TC’ (solder centre pin) Connectors
TC-200-BM-X BM 200 3190-2883 BNC-Male (plug) crimp connector; no braid trim
TC-200-MUHF MUHF 200 3190-444 Mini-UHF (plug) crimp connector
TC-200-NMH-X NM 200 3190-2882 N-Male (plug) crimp connector
TC-200-NM-RP NM-RP 200 3190-959 N-Male (plug) crimp connector, (female pin)
TC-200-SM-SS-X SM 200 3190-2881 SMA-Male (plug) crimp connector no braid trim
TC-200-SM-RA-D SM-RA 200 3190-6428 SMA-Male (plug) right angle,crimp connector no braid trim
TC-200-SM-RP SM-RP 200 3190-327 SMA-Male (plug) crimp/reverse polarity (female pin)
TC-200-TF-X TF 200 3190-2884 TNC-Female (jack) crimp connector, no briad trim
TC-200-TMC TM 200 3190-240 TNC-Male plug) clamp connector
TC-200-FMEF-X FME 200 3190-6249 FME female (jack) crimp connector, solder-pin
TC-200-FMEM-X FME 200 3190-6250 FME male (plug) crimp connector, solder-pin
CR-200-X CR 195/200 3190-6110 Crimp Rings for TC/EZ-195/200 Connectors
LMR-200    ‘EZ’ Install (non-solder) Connectors
EZ-195/200-4310M-X 4310M 195/200 3190-8092 4.3/10-male (plug) crimp connector, non-solder pin, no braid trim
EZ-195/200-4310M-RA-X 4310M-RA 195/200 3190-8093 4.3/10-male (plug) right angle, crimp connector, non-solder pin, no braid trim
EZ-200-BF-X BF 200 3190-6522 BNC-Female (plug) crimp connector, non-solder pin, no braid trim
EZ-200-BM-X BM 200 3190-6433 BNC-Male (plug) crimp connector, non-solder pin, no braid trim
EZ-195/200-716M-X 716M 195/200 3190-8102 7/16-male (plug) crimp connector, non-solder pin, no braid trim
EZ-195/200-716M-RA-X 716M-RA 195/200 3190-8103 7/16-male (plug) right angle, crimp connector, non-solder pin, no braid trim
EZ-200-FM-75-X FM-75 200 3190-6412 F-Male (plug) crimp connector, non-solder pin, no braid trim
EZ-195/200-NF-BH-X NF-BH 195/200 3190-8007 N-female (jack) bulkhead, crimp connector, non-solder pin, no braid trim
EZ-200-NMH-X NM 200 3190-2886 N-Male (plug) crimp connector (non-solder pin); hex/knurl nut, no braid trim
EZ-200-NMH-75-X NM-75 200 3190-6409 N-Male (plug) crimp connector, non-solder pin, no braid trim
EZ-195/200-QNF-X QNF 195/200 3190-8040 QN-female (jack) crimp connector, non-solder pin, no braid trim
EZ-195/200-QNM-X QNM 195/200 3190-8038 QN-male (plug) crimp connector, non-solder pin, no braid trim
EZ-195/200-QNM-RA-X QNM-RA 195/200 3190-8039 QN-male (plug) right angle, crimp connector, non-solder pin, no braid trim
EZ-195/200-SF-X SF 195/200 3190-8002 SMA-female (jack) crimp connector, non-solder pin, no braid trim
EZ-200-SF-SS-X SF 200 3190-6007 SMA-Female (jack) crimp connector, non-solder pin, no braid trim
EZ-200-SM-X SM 200 3190-6434 SMA-Male (plug) crimp connector, non-solder pin, no braid trim
EZ-200-SM-RA-SS-X SM-RA 200 3190-6006 SMA Male (plug), crimp connector, right angle, no braid trim
EZ-195/200-TF-BH-X TF-BH 195/200 3190-8004 TNC-female (jack) bulkhead, crimp connector, non-solder pin, no braid trim
EZ-200-TF-RP TF-RP 200 3190-793 TNC-Female (jack) crimp/reverse polarity (non-solder male pin)
EZ-200-TM-RA-X TM-RA 200 3190-6008 TNC-Male (plug) crimp connector, right angle, no briad trim
EZ-200-TM-X TM 200 3190-6418 TNC-Male (plug) crimp connector, non-solder pin, no braid trim
EZ-195/200-TM-RA-X TM-RA 195/200 3190-8003 TNC-male (plug) right angle, crimp connector, non-solder pin, no braid trim
EZ-200-TM-RP TM-RP 200 3190-792 TNC-Male (plug) crimp/reverse polarity (non-solder female pin)
EZ-195/200-UM-X UM 195/200 3190-8005 UHF-male (plug) crimp connector, non-solder pin, no braid trim
EZ-195/200-UM-RA-X UM-RA 195/200 3190-8006 UHF-male (plug) right angle, crimp connector, non-solder pin, no braid trim
CR-200-X CR 195/200 3190-6110 Crimp Rings for TC/EZ-195/200 Connectors

Installing the LMR-200-PVC Connectors

Installing the LMR EZ connector range is the easiest in the business. Detailed instructions come with the connector, however, to ensure you achieve the correct strip length every time, with minimum effort, we have you covered. You can use our TK-195/200EZ Cable assembly tool kit. The tool kit consists of a CST-195 strip tool, CT-240/200/195/100 crimp tool and a CCT-03 Cutting tool.

tk-195/200

Specification

ApplicationGeneral Purpose
cable od (in)0.195
cable od (mm)4.95
JacketPVC
Jacket colorBlack
weight lb/ft0.022
weight kg/m0.03
operating temperature range (f)-40 to +185
operating temperature range (c)-40 to +85
bending moment (ft-lb)0.2
bending moment (mm)0.27
Nato_Codes6145-01-619-8249
woosvi_sluga:1:{i:0;a:1:{s:4:"imgs";a:2:{i:0;s:5:"20303";i:1;s:5:"20302";}}}

Brand

LMR

LMR™ is recognised as the global brand name of the Industry standard, Flexible, Low Loss Communications Coaxial cable family designed and manufactured by Times Microwave Systems USA. LMR™ is also the brand name for the market leading, Times Microwave Systems range of  high performance coaxial connectors such as the 'TC' and 'EZ' connectors . These connectors are known internationally as the easiest coaxial connectors to terminate to flexible coaxial cables in the industry – with consistent resulting superior broadband Insertion Loss and VSWR performance. LMR™ is a registered trademark of Times Microwave Systems USA.

Datasheet

Download

Connectors

Installation Tools

The following Hardware and Installation tools are compatible

  • CCT-02

    CCT-02 Cutting Tool

    Part NumberCCT-02
    Stock Code3192-165

    CCT-02 Cutting Tool

    The CCT-02 cutting tool is designed to give a neat cut to any of the sizes of the below coaxial cables: The Blade is hardened, ensuring there is minimum wear over time.
    Add to Cart
  • CCT-03

    CCT-03 Cutting Tool

    Part NumberCCT-03
    Stock Code3192-267

    CCT-03 Cable Cutting Tool

    The CCT-03 tool is an efficient tool for cutting LMR, TCOM and RG cables having a diameter of LMR-600 or smaller. This tool provides a clean, square cut - leaving the the cable cut perfectly round. This cutting tool has been specially designed with a perfect spring force already built in to the tool to cut the cable. All the user needs to do is simply spin the tool, and it cuts the cable perfectly itself, every time. The Cutting tool comes with hardened blade, that allows 1000’s of cable cuts, with no degradation to the blade.
    Add to Cart
  • cst-195/200

    CST-195/200 Prep Tool

    Part NumberCST-195/200
    Stock Code3192-102
    CST-195/200 Cable Prep Tool
    The CST-195/200 manufactured by Times Microwave Systems and is designed to Strip all variations of LMR-195 and LMR-200 cable. This tool has 3 features: Cable cut (To centre conductor), Jacket stripper and centre conductor deburring tool. There is also an adjustment setting on the stripping tool to allow to cut for Times Microwave LMR Crimp connectors or Clamp connectors. Simply set it to the correct connector type and start stripping. The Cable Prep Tool has replaceable blades however this should not need to be done regularly as the blades have been proven to have a very long lasting life.
    Add to Cart
  • tk-195/200ez

    TK-195/200EZ

    Part NumberTK-195/200
    Stock Code660-0829

    TK-195/200EZ Cable Assembly Tool kit

    The TK-195/200EZ Cable Assembly Tool Kit has been designed for LMR-195 & LMR-200 crimp and clamp connectors. The tooling in the kit can be used with all LMR-195/200 cables and all LMR-195/200 X series connectors.
    The TK-195/200EZ tool kit consists of the following items:
    • CCT-03 Cable Cutting Tool
    • CST-195/200 Cable Stripping Tool
    • CT-240/200/195/100 Crimping Tool
    • Black Tool Bag
    CCT-03 Cutting tool
    The CCT-03 cutting tool, included in the TK-195/200EZ Tool Kit, is the first tool used to cut the LMR coaxial cable. This has been specially designed with a perfect spring force already built in to the tool to cut the cable. All the user needs to do is simply spin the tool, and it cuts the cable perfectly itself, every time. The CCT-03 cutting tool has a hardened blade, that allows 1000’s of cable cuts, with no degradation to the blade. The CCT-03 cutting tool is designed to cut from LMR-100 – LMR-600.
    CST-195/200 Cable Stripping Tool
    The CST-195/200 Cable Stripping Tool, included in the TK-195/200EZ Tool Kit, is the second tool used to strip the LMR coaxial cable. This tool has 3 features: Cable cut (To centre conductor), Jacket stripper and centre conductor deburring tool. There is also an adjustment setting on the stripping tool to allow to cut for Times Microwave LMR Crimp connectors or Clamp connectors. This avoids having to take the time to read instructions and measure. Simply set it to the correct connector type and start stripping!
    CT-240/200/195/100 Crimp Tool 
    The CT-240/200/195/100 Crimp Tool, included in the TK-195/200EZ Tool Kit is the final tool used to crimp the connector on to the LMR-195 & 200 coaxial cable. The Crimp Tool has been specifically designed with ultra strong dies that never wear over time. The dies are made to a very fine tolerance, specifically designed for LMR-195 & 200 X Series connectors. The result from using the CT-240/200/195/100 crimp tool is the perfect crimp, every time, with no tool degradation.
    Add to Cart

  • Replacement Blade Kit

    Part NumberRB-CST
    Stock Code3192-086
    Replacement blade kit for all CST cutting tools
    Add to Cart

  • Replacement Blade

    Part NumberRB-02
    Stock Code3192-166
    Replacement blade for cutting tool
     
    Add to Cart