Description
LMR-200-UF
LMR-200-UF Coaxial cable is a very popular product within the Times Microwave LMR coaxial cable range. The LMR range is recognised globally as the industry standard ultra low loss, flexible, low cost, lightweight, DC – 6GHz coaxial cable solution for many RF applications. This is also backed up by the best warranty and technical support in the business.
LMR-200-UF has excellent reliability, unsurpassed flexibility and ultra low attenuation. The LMR-240-UF cable was designed to give more flexibility than the LMR-200 cable. It has loss figures comparable to the extremely rigid corrugated coaxial cables however manages to achieve similar flexibility to that of high loss RG Cables. LMR-200-UF is around 40% lower attenuation than competing RG Air-Dielectric type Cables.
How is the LMR-200-UF low loss figures achieved?
This is achieved due to the cable construction specifications. The centre conductor uses a high conductivity, Bare copper stranded centre conductor. The dielectric is nitrogen injected, foamed, closed cell, Polyethylene which helps achieve 83% Velocity of Propagation. The Dielectric has a Aluminium foil outer conductor, which is chemically bonded on to it. Due to the cable construction, The attenuation is significantly lower as compared to single shielded coaxial cables.
Outer Jacket
All UltraFlex LMR coaxial cables comes with a TPE outer jacket. This ensures maximum flexibility for repeated or periodic flexures.
Frequency Operating Band
LMR-200-UF is designed to operate excellent from DC – 6GHz. For any frequency band at VHF and above LMR is the obvious choice.
Applications
- Jumper Assemblies in Wireless Communications Systems
- Short Antenna Feeder runs
- WLL
- GPS
- LMR
- WLAN
- WISP
- WiMAX
- SCADA
- Radio antennas or receivers
- TVRO
- Mobile Antennas
- High gain 4G antennas
- Any application that requires additional flexibility
Attenuation dB figures per 100m
Temperature range: -40⁰C – +85⁰C
Mechanical Specifications
LMR-200-UF Connectors
LMR-200-UF ‘TC’ (solder centre pin) Connectors | ||||
TC-200-BM-X | BM | 200 | 3190-2883 | BNC-Male (plug) crimp connector; no braid trim |
TC-200-MUHF | MUHF | 200 | 3190-444 | Mini-UHF (plug) crimp connector |
TC-200-NMH-X | NM | 200 | 3190-2882 | N-Male (plug) crimp connector |
TC-200-NM-RP | NM-RP | 200 | 3190-959 | N-Male (plug) crimp connector, (female pin) |
TC-200-SM-SS-X | SM | 200 | 3190-2881 | SMA-Male (plug) crimp connector no braid trim |
TC-200-SM-RA-D | SM-RA | 200 | 3190-6428 | SMA-Male (plug) right angle,crimp connector no braid trim |
TC-200-SM-RP | SM-RP | 200 | 3190-327 | SMA-Male (plug) crimp/reverse polarity (female pin) |
TC-200-TF-X | TF | 200 | 3190-2884 | TNC-Female (jack) crimp connector, no briad trim |
TC-200-TMC | TM | 200 | 3190-240 | TNC-Male plug) clamp connector |
TC-200-FMEF-X | FME | 200 | 3190-6249 | FME female (jack) crimp connector, solder-pin |
TC-200-FMEM-X | FME | 200 | 3190-6250 | FME male (plug) crimp connector, solder-pin |
CR-200-X | CR | 195/200 | 3190-6110 | Crimp Rings for TC/EZ-195/200 Connectors |