Description
LMR-240-LLPX
LMR-240-LLPX cable is an indoor, highly fire retardant cable intended specifically for runs within return air handling plenums (e.g. dropped ceilings, raised floors). It has a UL/NEC & CSA rating of ‘CMP’ and ‘FT6’ respectively.
The LMR range is recognised globally as the industry standard ultra low loss, flexible, low cost, lightweight, DC – 6GHz coaxial cable solution for many RF applications. This is also backed up by the best warranty and technical support in the business.
LMR-240-LLPX is highly fire retardant as well as having excellent reliability, unsurpassed flexibility and ultra low attenuation. The LMR-240-LLPX cable has loss figures comparable to the extremely rigid corrugated coaxial cables however manages to achieve similar flexibility to that of high loss RG Cables. LMR-240 is around 40% lower attenuation than equivalent sized RG Air-Dielectric type Cables.
How is the LMR-240-LLPX low loss figures achieved?
This is achieved due to the cable construction specifications. The centre conductor uses a high conductivity, Bare copper clad covered aluminium centre conductor material. The dielectric is nitrogen injected, foamed, closed cell, Polyethylene which helps achieve 76% Velocity of Propagation. The Dielectric has a Aluminium foil outer conductor, which is chemically bonded on to it. Due to the cable construction, The attenuation is significantly lower as compared to single shielded coaxial cables: RF shielding of LMR-240 is > 90 db as compared to 40 dB for RG8X.
Outer Jacket
The Jacket of the LMR-240-LLPX is made from Fluoropolymer, this is engineered to create a low loss coaxial cable that is highly fire retardant, with a much wider operating temperature range.
Frequency Operating Band
LMR-240-LLPX is designed to operate excellent from DC – 6GHz. For any frequency band at VHF and above LMR is the obvious choice.
Applications
- Drop-in replacement with up to 40% Lower Attenuation than Size Equivalent, RG Air-Dielectric type Cables
- Indoor/Outdoor Plenum Feeder Runs
- Jumper Assemblies in Wireless Communications Systems
- UL/NEC/CSA rated CMP/FT6 (listed under UL file #E-170516)
- Short Antenna Feeder runs
- WLL
- GPS
- LMR
- WLAN
- WISP
- WiMAX
- SCADA
- 3G or 4G repeaters
- Radio antennas or receivers
- VSAT Applications
- TVRO
- Indoor and Outdoor feeder runs
- Any application that requires an easily routed, low loss RF Cable for in building systems.
LMR-240-LLPX Plenum Connectors | ||||
EZ-240-SM-PL-X | SM | 240 | 3190-3075 | SMA-Male (plug) crimp connector for LMR-240-LLPL, non solder pin, no braid trim |
EZ-240-TF-PL-X | TF | 240 | 3190-6372 | TNC-female (jack) crimp connector, non-solder pin, no braid trim |
EZ-240-TM-PL-X | TM | 240 | 3190-6373 | TNC-male (plug) crimp connector, non-solder pin, no braid trim |
EZ-240-TM-RP-PL-X | TM-RP | 240 | 3190-6404 | TNC-Male (plug) crimp, reverse polarity (non-solder pin), no braid trim |