Description
LMR-240-UF-FR
LMR-240-UF-FR is a non-halogen (non-toxic), low smoke, fire retardant cable. This coaxial cable is a very popular product within the Times Microwave LMR coaxial cable range. The LMR range is recognised globally as the industry standard ultra low loss, flexible, low cost, lightweight, DC – 6GHz coaxial cable solution for many RF applications. This is also backed up by the best warranty and technical support in the business.
Why choose LMR-240-UF-FR?
LMR-240-UF-FR is fire retardant combined with excellent reliability, unsurpassed flexibility and ultra low attenuation. The LMR-240-UF-FR cable was designed to give more flexibility than the LMR-240 cable. It has loss figures comparable to the extremely rigid corrugated coaxial cables however manages to achieve similar flexibility to that of high loss RG Cables. LMR-240-UF-FR is around 40% lower attenuation than competing RG Air-Dielectric type Cables.
How is the LMR-240-UF-FR low loss figures achieved?
This is achieved due to the cable construction specifications. The centre conductor uses a high conductivity, Bare copper stranded centre conductor. The dielectric is nitrogen injected, foamed, closed cell, Polyethylene which helps achieve 80% Velocity of Propagation. The Dielectric has a Aluminium foil outer conductor, which is chemically bonded on to it. Due to the cable construction, The attenuation is significantly lower as compared to single shielded coaxial cables.
Outer Jacket
The LMR-240-UF-FR comes with a FRPE outer jacket. The outer jacket is fire retardant and ensures maximum flexibility for repeated or periodic flexures.
Frequency Operating Band
LMR-240-UF-FR is designed to operate excellent from DC – 6GHz. For any frequency band at VHF and above LMR is the obvious choice.
Should you find your RF system operates at above 1GHz, LMR is once again, your best option, as RG cable typically isn’t compatible with any frequency in excess of 1GHz.
Applications
- Jumper Assemblies in Wireless Communications Systems
- Short Antenna Feeder runs
- WLL
- GPS
- LMR
- WLAN
- WISP
- WiMAX
- SCADA
- Radio antennas or receivers
- TVRO
- Mobile Antennas
- High gain 4G antennas
- Any application that requires additional flexibility
Attenuation dB figures per 100m
Temperature range: -40⁰C – +85⁰C
Mechanical Specifications
Connectors
| TC Style Solder Connectors |
| 4.3/10 DIN Male (plug) crimp (solder-on pin), hex nut, no braid trim – TC-240-4310M-X |
| 7/16 DIN Male crimp; (non-solder pin) – TC-240-716M |
| 7/16 DIN Male crimp right angle; (solder pin) – TC-240-716M-RA-D |
| BNC Male (plug) crimp connector, no braid trim – TC-240-BM-X |
| Type BNC-Male (plug) crimp connector for LMR-240-75, no braid trim – TC-240-BM-75-X |
| BNC Male (plug) clamp connector – TC-240-BMC |
| BNC-male (plug) right angle, crimp connector, solder-on pin – TC-240-BM-RA-D |
| Type F-Male (plug) crimp connector (solder-on pin) for LMR-240, no braid trim+A1 – TC-240-FM-X |
| Type F-Male (plug) crimp connector (solder pin) for LMR-240-75 – TC-240-FMH-75 |
| FME male (plug) crimp connector, solder on pin – TC-240-FMEM-X |
| Mini-UHF (plug) crimp connector – TC-240-MUHF |
| N-Female (jack) crimp bulkhead connector, no braid trim – TC-240-NF-BH-X |
| N-Female (jack) crimp panel mount (4-hole flange) connector, no braid trim – TC-240-NF-PM-X |
| N-Male (plug) crimp connector; no braid trim – TC-240-NMH-X |
| N-Male (plug) crimp connector (solder-on pin) for LMR-240-75 – TC-240-NM-75 |
| N-Male (plug) clamp connector – TC-240-NMC |
| N-male (plug) right angle, crimp connector, solder-on pin – TC-240-NMH-RA-D |
| SMA-Female (jack) crimp bulkhead connector, no braid trim – TC-240-SF-BH-SS-X |
| SMA-Male (plug) crimp connector, no braid trim – TC-240-SM-SS-X |
| SMA-Male (plug) crimp right angle connector – TC-240-SM-RA-SS-D |
| SMA-Male (plug) crimp/reverse polarity (female pin) – TC-240-SM-RP |
| TNC-male (plug) crimp connector, solder-on pin, no braid trim – TC-240-TM-X |
| TNC-male (plug) right angle crimp connector, solder-on pin – TC-240-TM-RA-D |
Installing LMR-240-UF-FR Connectors
Installing the LMR EZ connector range is the easiest in the business. Detailed instructions come with the connector, however, to ensure you achieve the correct strip length every time, with minimum effort, we have you covered. You can use our TK-240EZ Tool Kit. The tool kit consists of a CST-240 strip tool, CT-240/200/195/100 crimp tool and a CCT-03 Cutting tool.
