Description
LMR-400-White
LMR-400-White cable is a Flexible Low Loss Communications Coaxial cable, supplied in any length – manufactured by Times Microwave Systems and available from McGill Microwave – Authorised Distributor of all Times Microwave products.
LMR-400-White Coaxial cable is the most popular product within the Times Microwave LMR coaxial cable range. The LMR range is recognised globally as the industry standard ultra low loss, flexible, low cost, lightweight, DC – 6GHz coaxial cable solution for many RF applications. This is also backed up by the best warranty and technical support in the business.
Why choose LMR-400-White?
LMR-400 is an extremely popular coaxial cable in the industry due to its excellent reliability, unsurpassed flexibility and ultra low attenuation. The LMR-400 cable has loss figures comparable to the extremely rigid corrugated coaxial cables however manages to achieve similar flexibility to that of high loss RG Cables. LMR-400 is around 40% lower attenuation than RG-8, RG 213, RG 214 and 9913 Air-Dielectric type Cables.
The LMR-400-White performance is identical to the LMR-400 cable, the jacket is of the same material being Polyethylene, meaning the cable does not degrade with UV exposure. This therefore means the LMR-400-White cable can be used in both indoor and outdoor use.
The LMR-400-White cable is the preferred use when run indoors or outdoors along light coloured walls, which helps the cable to blend in with it’s surroundings.
How is the LMR-400-White low loss figures achieved?
This is achieved due to the cable construction specifications. The centre conductor uses a high conductivity, Bare copper clad covered aluminium centre conductor material. The dielectric is nitrogen injected, foamed, closed cell, Polyethylene which helps achieve 84% Velocity of Propagation. The Dielectric has a Aluminium foil outer conductor, which is chemically bonded on to it. Due to the cable construction, The attenuation is significantly lower as compared to single shielded coaxial cables: RF shielding of LMR-400-White is > 90 db as compared to 40 dB for RG8.
Outer Jacket
All standard LMR coaxial cable comes with a UV resistant, White PE Jacket. This helps to ensure the cable jacket can withstand harsh outside environments and UV rays from sunlight, this is designed to last for up to 20 years of outdoor service.
Frequency Operating Band
LMR-400-White is designed to operate excellent from DC – 6GHz. For any frequency band at VHF and above LMR is the obvious choice.
Should you find your RF system operates at above 1GHz, LMR is once again, your best option, as RG cable typically isn’t compatible with any frequency in excess of 1GHz.
Applications
- Drop-in replacement with up to 40% Lower Attenuation for RG-8 , RG 213 ,RG 214 and 9913 Air-Dielectric type Cables
- Jumper Assemblies in Wireless Communications Systems
- Short Antenna Feeder runs
- WLL
- GPS
- LMR
- WLAN
- WISP
- WiMAX
- SCADA
- 3G or 4G repeaters
- Radio antennas or receivers
- VSAT Applications
- TVRO
Attenuation dB figures per 100m
Temperature range: -40⁰C – +85⁰C
Mechanical Specifications
Connectors
LMR-400-White ‘TC’ (solder centre pin) Connectors | ||
TC-400-716FC | 7/16 DIN Female (jack) clamp connector | |
TC-400-716MC | 7/16 DIN Male (plug) clamp connector | |
TC-400-716MC-RA | 7/16 DIN Male (plug) clamp connector | |
TC-400-716M-RA-D | 7/16 DIN Male crimp right angle; (solder pin) | |
TC-400-716M-X | 7/16 DIN Male (plug) crimp (solder-on pin), hex nut, no braid trim | |
TC-400-BM-X | BNC-Male (plug) crimp connector, no braid trim | |
TC-400-BM-75-X | Type BNC-Male (plug) crimp connector (crimp pin) for LMR-400-75, no braid trim | |
TC-400-HNM | HN-Male (plug) clamp connector | |
TC-400-HNM-RA | HN-Male (plug) crimp right angle (solder-on pin) hex/knurl nut | |
TC-400-MUHF | Mini-UHF (plug) crimp connector | |
TC-400-NF-X | N-Female (jack) crimp connector (solder on pin) | |
TC-400-NFC-BH (A) | N-Female (jack) clamp bulkhead connector | |
TC-400-NFC | N-Female (jack) clamp connector | |
TC-400-NM | N-Male (plug) crimp/knurled coupling nut | |
TC-400-NMH-X | N-Male (plug) crimp (solder-on pin) hex/knurl nut, no braid trim | |
TC-400-NM-75 | N-Male (plug) crimp connector for LMR-400-75 | |
TC-400-NM-75/50 | N-Male (plug) crimp connector for LMR-400-75 (50-ohm interface) | |
TC-400-NMC-2 | N-Male (plug) clamp connector | |
TC-400-NMC-RA (A) | N-Male (plug) clamp right angle connector | |
TC-400-NMH-RA-D | N-Male (plug) right angle crimp connector, no braid trim | |
TC-400-NMH-RA-SS | N-Male (plug) crimp right angle connector/solder-on pin; stainless steel | |
TC-400-NM-RP | N-Male (plug) crimp connector, reverse polarity (female pin) | |
TC-400-QDSM | QDS-Male (plug) clamp connector | |
TC-400-QNM-X | QN-Male (plug) crimp connector, solder pin, no braid trim | |
TC-400-SM-X | SMA-Male (plug) crimp connector; no braid trim | |
TC-400-SF-X | SMA female (jack) crimp connector, solder pin, no braid trim | |
TC-400-TF-X | TNC-Female (jack) crimp connector, solder pin, no braid trim | |
TC-400-TF-RP | TNC-Female (jack) crimp/reverse polarity (solder-on male pin) | |
TC-400-TM-X | TNC Male (plug) crimp (solder-on pin) hex/knurl nut, no braid trim | |
TC-400-TM-RA-D | TNC Male (plug) crimp right angle connector (watertight) | |
TC-400-TM-RP | TNC-Male (plug) crimp/reverse polarity (solder-on female pin) | |
TC-400-TM-RP-RA-D | TNC-Male (plug) crimp/reverse polarity, right angle connector, solder pin | |
TC-400-4310M-X | 4.3/10 mini DIN Male (plug) solder-pin, hex/nut. | |
LMR-400 ‘EZ’ Install (non-solder) Connectors | ||
EZ-400-4195M-X | 4.1/9.5 mini DIN Male (plug) crimp (non-solder pin), hex/knurl nut, no braid trim | |
EZ-400-4310M-X | 4.3/10-Male (plug) crimp non-solder pin, no braid trim | |
EZ-400-4310M-RA-X | 4.3/10-Male (plug) right angle crimp non-solder pin, no braid trim | |
EZ-400-716M-X | 7/16 DIN Male crimp; (non-solder pin) hex nut, no braid trim | |
EZ-400-716M-RA-X | 7/16 DIN Male crimp right angle; (non-solder pin), hex nut, no braid trim | |
EZ-400-BM-X | BNC-Male (plug) crimp connector, non-solder pin, no braid trim | |
EZ-400-BM-RA-X | BNC-Male (plug) crimp right angle, non-solder pin, no braid trim | |
EZ-400-FM-75 | F-Male (plug) crimp connector (non-solder pin) for LMR-400-75; knurled | |
EZ-400-FMH-75 | F-Male (plug) crimp connector (non-solder pin) for LMR-400-75; hex | |
EZ-400-NF-BH-X | N-female (jack) bulkhead crimp non-solder pin, no braid trim | |
EZ-400-NF-X | N-Female (jack) crimp connector, non-solder pin | |
EZ-400-NMC-2-D | N-Male (plug) clamp; hex/knurl coupling nut; non-solder pin; 2-piece design | |
EZ-400-NMH-RA-X | N-Male (plug) crimp right angle (non-solder pin) hex/knurl nut, no braid trim | |
EZ-400-NMH-X | N-Male (plug) crimp (non-solder pin) hex/knurl nut, no braid trim | |
EZ-400-NMK-X | N-Male (plug) crimp non-solder pin, no braid trim | |
EZ-400-NMH-75-X | N-Male (plug) crimp non-solder pin, no braid trim | |
EZ-400-QNF-X | QN-female (jack) crimp non-solder pin, no braid trim | |
EZ-400-QNM-X | QN-Male (plug) crimp non-solder pin, no braid trim | |
EZ-400-QNM-RA-X | QN-Male (plug) crimp right angle non-solder pin, no braid trim | |
EZ-400-SF-X | SMA-female (jack) crimp connector, non-solder pin, no braid trim | |
EZ-400-SM-X | SMA-male (plug) crimp connector, non-solder pin, no braid trim | |
EZ-400-SM-RA-X | SMA-male (plug) right angle, crimp connector, non-solder pin, no braid trim | |
EZ-400-TF-X | TNC-Female (jack) crimp (non-solder pin) no braid trim | |
EZ-400-TF-BH-X | TNC-female (jack) bulkhead, crimp connector, non-solder pin, no braid trim | |
EZ-400-TF-RP | TNC-Female (jack) crimp/reverse polarity (non-solder male pin) | |
EZ-400-TM-X | TNC-Male (plug) crimp (non-solder pin) hex/knurl nut, no braid trim | |
EZ-400-TM-RA-X | TNC-Male (plug) crimp right angle connector/non solder pin, no braid trim | |
EZ-400-TM-RP | TNC-Male (plug) crimp/reverse polarity (non-solder female pin) | |
EZ-400-UM | UHF male (plug) crimp connector/non-solder pin | |
EZ-400-UM-X | UHF-male (plug) crimp connector, non-solder pin, no braid trim | |
EZ-400-UM-RA-X | UHF-male (plug) right angle, crimp connector, non-solder pin, no braid trim |
