LMR-600 Cable Assemblies
At McGill Microwave Systems, we have the capability to supply LMR-600 Cable Assemblies with any combination of Times Microwave connectors.
The LMR-600 cable assemblies – supplied by McGill Microwave Systems, uses the LMR-600 Cable range combined with Times Microwave X Series Tri Metal/Alballoy plated connectors which provide superior broadband VSWR performance.
The Times Microwave Systems LMR Cable Assemblies range is recognised globally as the Industry Standard Ultra Low Insertion Loss, Flexible, Low Cost, Lightweight DC-6 GHz solution for most applications – backed up by the best warranty and technical support in the business.
LMR-600 Coaxial Cable
LMR-600 Coaxial cable is an extremely popular cable in the industry due to its excellent reliability, surpassed flexibility and ultra low attenuation. The LMR cable has loss figures comparable to the extremely rigid corrugated coaxial cables however manages to achieve similar flexibility to that of high loss RG Cables.
This is achieved due to the cable construction specifications. The centre conductor uses a high conductivity, Bare copper clad covered aluminium centre conductor material. The dielectric is nitrogen injected, foamed, closed cell, Polyethylene which helps achieve a very high % Velocity of Propagation. The Dielectric has a Aluminium foil outer conductor, which is chemically bonded on to it. Due to the cable construction, The attenuation is significantly lower as compared to single shielded coaxial cables.
LMR-600 Cable Assemblies – Frequency Operating Band
LMR-600 cable assemblies are designed to operate excellent from DC – 6GHz. For any frequency band at VHF and above LMR is the obvious choice.
The Times Microwave X Series, that are used to turn the coaxial cable into an assembly, have been engineered to offer the additional key advantages and features over our competitors’ products:
- Albaloy/Tri-Plate plating – resulting in superior Corrosion/Salt Fog resistance performance.
- No braid trim feature – saves time during termination
- Excellent broadband VSWR performance
- Centre pins plated with substantial 50 micro inches of gold- enhanced mate/de-mate life.
- IP 67 Waterproof rated when used with the Times WSB strain relief Weather Sealing Boots.
- Rugged Design with hex Coupling nut feature on Male connectors -enabling the use of torque tools to ensure proper mating force
- Compatible with Times assembly aid tooling such as CST and CT strip/crimp tools
- Solderless rapid assembly design
- Indelible Laser marked with the Times part number
- Superior pull strength /connector retention designs.
The custom made LMR-600 cable assemblies can be supplied with any available Times Microwave connector on either end of the coaxial cable. Below is a list of the connectors that McGill Microwave Stock and can be installed on your cable of choice:
|LMR-600 ‘TC’ (solder-on center pin) Connectors|
|TC-600-716FC||7/16 DIN Female clamp connector|
|TC-600-716MC||7/16 DIN Male clamp connector|
|TC-600-716M-X||7/16 DIN Male crimp connector (solder-on pin) hex nut, no braid trim|
|TC-600-716M-RA-D||7/16 DIN Male crimp right angle connector|
|TC-600-HNMC||HN-Male (plug) clamp connector|
|TC-600-LCM||LC-Male (plug) clamp connector|
|TC-600-NF-X||N-Female (jack) crimp connector (solder-on-pin)|
|TC-600-NF-BH||N-Female (jack) crimp bulkhead connector|
|TC-600-NFC-BH||N-Female (jack) clamp bulkhead connector|
|TC-600-NMC-2-D||N-Male (plug) straight solder pin (2 pieces) clamp connector|
|TC-600-NMC||N-Male (plug) clamp hex coupling nut connector|
|TC-600-NMH-X||N-Male (plug) crimp connector (solder-on pin) hex/knurl nut, no braid trim for use to 8 GHz|
|TC-600-NMH-75/50||N-Male (plug) crimp connector (solder-on pin) for LMR-600-75 (50-ohm Interface)|
|TC-600-NMH-RA-D||N-Male (plug) crimp right angle connector|
|TC-600-QDSM||QDS-Male (plug) clamp connector|
|TC-600-TM-X||TNC-Male (plug) crimp connector (solder-on pin) hex/knurl nut, no braid trim|
|TC-600-TF-X||TNC-Female (jack) crimp connector hex/knurl nut, no braid trim|
|TC-600-TF-RP||TNC-Female (jack) crimp/reverse polarity (solder-on male pin)|
|TC-600-TM-RP||TNC-Male (plug) crimp/reverse polarity (solder-on female pin)|
|TC-600-TM-RA-D||TNC-Male (plug) crimp right angle connector+A1|
|TC-600-UMC||UHF-Male (plug) clamp connector|
|TC-600-4310M-X||4.3/10 mini DIN Male (plug) solder-pin, hex/nut.|
|LMR-600 ‘EZ’ Install (non-solder) Connectors|
|EZ-600-4310M-X||4.3/10-male (plug) crimp connector, non-solder pin, no braid trim|
|EZ-600-4310M-RA-X||4.3/10-male (plug) right angle crimp connector, non-solder pin, no braid trim|
|EZ-600-716F-X||7/16 DIN Female crimp; (non-solder pin)|
|EZ-600-716M-X||7/16 DIN Male crimp, hex coupling nut/non-solder pin/no braid trim|
|EZ-600-716M-RA-X||7/16 DIN Male crimp right angle; (non-solder pin), no braid trim|
|EZ-600-78 EIA||7/8 EIA Flange clamp connector|
|EZ-600-FM-75-X||F-male (plug) crimp connector, non-solder pin, no braid trim|
|EZ-600-NF-BH-X||N-female (jack) bulkhead, crimp connector, non-solder pin, no braid trim|
|EZ-600-NF-BH||N-Female (jack) crimp bulkhead connector/non-solder pin|
|EZ-600-NF-X||N-Female (jack) crimp connector, non-solder pin|
|EZ-600-NMH-X||N-Male (plug) crimp connector (non-solder pin) hex/knurl nut, no braid trim|
|EZ-600-NM-75||N-Male (plug) crimp connector (non-solder pin) for LMR-600-75|
|EZ-600-NMC-2-D||N-Male (plug) clamp connector/non-solder pin, 2 Piece Design|
|EZ-600-NMK||N-Male (plug) crimp knurled coupling nut/non-solder|
|EZ-600-NMH-RA-X||N-Male (plug) crimp right angle connector/non-solder pin, no braid trim|
|EZ-600-QNF-X||QN-female (jack) crimp connector, non-solder pin, no braid trim|
|EZ-600-QNM-X||QN-male (plug) crimp connector, non-solder pin, no braid trim|
|EZ-600-QNM-RA-X||QN-male (plug) right angle crimp connector, non-solder pin, no braid trim|
|EZ-600-SM-X||SMA-male (plug) crimp connector, non-solder pin, no braid trim|
|EZ-600-TF-X||TNC-Female (jack) crimp connector (non-solder pin) hex/knurl nut, no braid trim|
|EZ-600-TF-BH-X||TNC-female (jack) bulkhead, crimp connector, non-solder pin, no braid trim|
|EZ-600-TF-RP||TNC-Female (jack) crimp/reverse polarity (non-solder male pin)|
|EZ-600-TM-X||TNC-Male (plug) crimp connector (non-solder pin) hex/knurl nut, no braid trim|
|EZ-600-TM-RP||TNC-Male (plug) crimp/reverse polarity (non-solder female pin)|
|EZ-600-UM||UHF-Male (plug) crimp connector/non-solder pin|
|EZ-600-UM-X||UHF-male (plug) crimp connector, non-solder pin, no braid trim|
|EZ-600-UM-RA-X||UHF-male (plug) right angle, crimp connector, non-solder pin, no braid trim|
Weather Sealing, Strain Relief Boots
When any of our LMR Cable assemblies are used with our WSB weather sealing strain relief boots, the assembly becomes IP67 Rated. This gives extra assurance by fully mitigating any risk of dust ingress and is fully Protected from immersion in water between 15 centimetres and 1 meter in depth.
The soft silicone boot weatherproofing kits replace older weatherproofing methods. The WSB™ weather seal strain relief boots are IP67 rated and are both RoHS and REACH Compliant.
The Weather sealing boots has ribs built in and snap on to our Times Microwave connectors, which also have ribs. This created an excellent, water tight, labyrinth seal effect, which gives excellent sealing abilities.
LMR-600 Cable Assemblies – Low Prices!
There’s even more great news! At McGill Microwave, we mange to keep our prices extremely competitive, with added lightning fast delivery time.