Contact & Support: +44 (0)1592 655428
$0.00
0
Specialist Live Chat
Coaxial Cable Calculator
Enquiry Form
Home  ›  Products  ›  Coaxial Cables  ›  LMR Cable  ›  LMR  ›  LMR-LW240-LSZH
 

LMR®-LW240-LSZH

$2.82 EX VAT

$0.86 per foot EX VAT
  • GBP: £2.15

LMR-240-LSZH is a Zero halogen (non-toxic), low smoke, fire retardant, low loss coaxial cable – Manufactured by Times Microwave Systems.
lmr-400-fr
Looking for LMR-240-FR?
Meters
SKU: LMR-LW240-LSZH Category:

Description

LMR-LW240-LSZH 

LMR-LW240-LSZH Coaxial cable is an Ultra-Low Loss, Lightweight, Low Smoke, Zero Halogen Coaxial Cable, Manufactured by Times Microwave Systems.

Why choose LMR-LW240-LSZH?

LMR-LW240-LSZH is a non-halogen (non-toxic), low smoke, fire retardant cable with excellent reliability, unsurpassed flexibility and ultra low attenuation. The LMR-240-LSZH cable has loss figures comparable to the extremely rigid corrugated coaxial cables however manages to achieve similar flexibility to that of high loss RG Cables. LMR-240 is around 40% lower attenuation than competing RG Air-Dielectric type Cables.

How is the LMR-LW240-LSZH low loss figures achieved?

This is achieved due to the cable construction specifications. The centre conductor uses a high conductivity, Bare copper clad covered aluminium centre conductor material. The dielectric is nitrogen injected, foamed, closed cell, Polyethylene which helps achieve 83% Velocity of Propagation. The Dielectric has a Aluminium foil outer conductor, which is chemically bonded on to it. Due to the cable construction, The attenuation is significantly lower as compared to single shielded coaxial cables.

Outer Jacket

All LMR-LSZH coaxial cables comes with a UV resistant, LSZH PE Jacket. This helps to ensure the cable jacket can withstand harsh outside environments and UV rays from sunlight, as well as being suitable for indoor use due to the jacket being zero halogen (non-toxic), low smoke & fire retardant.

Flame Meets the following certifications:

  • EC-332-1-2
  • IEC 332-3 CAT.C
  • UL-VW1
  • UL-1581
  • IEE-383
  • BS-4066-1
  • BS-4066-3
  • UL-1685
  • NFPA-130

Smoke meets the following certifications:

  • IEC-61034-2
  • NES-711

Halogen Meets the following certifications:

  • IEC-60754-1
  • BS 6425-1
  • IEC-60754-2
  • BS 6425-2

Frequency Operating Band

LMR-LW240-LSZH is designed to operate excellent from DC – 6GHz. For any frequency band at VHF and above LMR is the obvious choice.

 Applications

LMR-LW240-LSZH Flexible Low Loss Communications Coaxial Cable is ideal for:
  • Jumper Assemblies in Wireless Communications Systems
  • Short Antenna Feeder runs
  • WLL
  • GPS
  • LMR
  • WLAN
  • WISP
  • WiMAX
  • SCADA
  • Radio antennas or receivers
  • TVRO
  • Mobile Antennas

Attenuation dB figures per 100m

30 MHz : 5.8dB
50 MHz : 7.5dB
150 MHz : 13.1dB
220 MHz : 15.9dB
450 MHz : 22.8dB
900 MHz : 32.6dB
1500 MHz : 42.4dB
1800 MHz : 46.6dB
2000 MHz: 49.3dB
2500 MHz: 55.4dB
5800 MHz: 86.5dB
8000 MHz: 102.8dB

Temperature range: -40⁰C – +85⁰C 

Inner Conductor: Solid BC (1.12mm)
Dielectric: Foam PE (2.95mm)
Outer conductor: Aluminium tape (3.07mm)
Overall Braid: Tinned copper (3.66mm)
Jacket: Black FRPE (4.95mm)

Mechanical Specifications

Bend Radius: installation 12.7mm
Bend Radius: repeated 50.8mm
Bending Moment: 0.27Nm
Weight  0.03Kg/M
Tensile Strength  48Kg
Flat Plate Crush: 0.27Kg/mm

Connectors

At McGill Microwave systems, we supply a huge range of connectors that include all the common interface modes. The connectors come in EZ style fitment, for rapid solderless assembly or the traditional TC solder type connectors.
TC Style Solder Connectors
4.3/10 DIN Male (plug) crimp (solder-on pin), hex nut, no braid trim – TC-240-4310M-X
7/16 DIN Male crimp; (non-solder pin) – TC-240-716M
7/16 DIN Male crimp right angle; (solder pin) – TC-240-716M-RA-D
BNC Male (plug) crimp connector, no braid trim – TC-240-BM-X
Type BNC-Male (plug) crimp connector for LMR-240-75, no braid trim – TC-240-BM-75-X
BNC Male (plug) clamp connector – TC-240-BMC
BNC-male (plug) right angle, crimp connector, solder-on pin – TC-240-BM-RA-D
Type F-Male (plug) crimp connector (solder-on pin) for LMR-240, no braid trim+A1 – TC-240-FM-X
Type F-Male (plug) crimp connector (solder pin) for LMR-240-75 – TC-240-FMH-75
FME male (plug) crimp connector, solder on pin – TC-240-FMEM-X
Mini-UHF (plug) crimp connector – TC-240-MUHF
N-Female (jack) crimp bulkhead connector, no braid trim – TC-240-NF-BH-X
N-Female (jack) crimp panel mount (4-hole flange) connector, no braid trim – TC-240-NF-PM-X
N-Male (plug) crimp connector; no braid trim – TC-240-NMH-X
N-Male (plug) crimp connector (solder-on pin) for LMR-240-75 – TC-240-NM-75
N-Male (plug) clamp connector – TC-240-NMC
N-male (plug) right angle, crimp connector, solder-on pin – TC-240-NMH-RA-D
SMA-Female (jack) crimp bulkhead connector, no braid trim – TC-240-SF-BH-SS-X
SMA-Male (plug) crimp connector, no braid trim – TC-240-SM-SS-X
SMA-Male (plug) crimp right angle connector – TC-240-SM-RA-SS-D
SMA-Male (plug) crimp/reverse polarity (female pin) – TC-240-SM-RP
TNC-male (plug) crimp connector, solder-on pin, no braid trim – TC-240-TM-X
TNC-male (plug) right angle crimp connector, solder-on pin – TC-240-TM-RA-D
EZ Style non-Solder Connectors
1.0/2.3-Male (plug) crimp connector (non-solder pin), no braid trim – EZ-240-1023M-X
4.3/10 DIN Male (plug) crimp (non-solder-on pin), hex nut, no braid – EZ-240-4310M-X
4.3/10-male, right angle, crimp connector, non-solder pin, no braid trim – EZ-240-4310M-RA-X
BNC-Male (plug) crimp right angle connector/non solder pin, no braid trim – EZ-240-BM-RA-X
BNC Male (plug) crimp connector (non-solder pin), no braid trim – EZ-240-BM-X
BNC-male (plug) crimp connector, non-solder pin, 75 ohm, no braid trim – EZ-240-BM-75-X
7/16-male (plug) right angle, crimp connector, non-solder pin, no braid trim – EZ-240-716M-RA-X
F-male (plug) crimp connector, non-solder pin, no braid trim – EZ-240-FM-75-X
Type F-Male (plug) crimp connector (non-solder pin) for LMR-240-75 – EZ-240-FMH-75
N-Female (jack) crimp connector (non-solder pin), no braid trim – EZ-240-NF-X
N-female (jack) bulkhead crimp connector, non-solder pin, no braid trim – EZ-240-NF-BH-X
N-Male (plug) crimp connector (non-solder pin); hex/knurl nut, no braid trim – EZ-240-NMH-X
N-male (plug) crimp connector, non-solder pin, no braid trim – EZ-240-NMH-X
N-Male (plug) crimp right angle (non-solder pin) hex/knurl nut, no braid trim – EZ-240-NMH-RA-X
QMA-Male crimp connector/non-solder; Quick Disconnect SMA, no braid trim – EZ-240-QM-X
QMA-Male crimp right angle/non-solder; Quick Disconnect SMA, no braid trim – EZ-240-QM-RA-X
QN-female (jack) crimp connector, non-solder pin, no braid trim – EZ-240-QNF-X
QN-male (plug) crimp connector, non-solder pin, no braid trim – EZ-240-QNM-X
QN-male (plug) right angle, crimp connector, non-solder pin, no braid trim – EZ-240-QNM-RA-X
SMA-female (jack), crimp connector, non-solder pin, no braid trim – EZ-240-SF-X
SMA-male (plug) crimp connector, non-solder pin, no braid trim – EZ-240-SM-X
SMA-Male (plug) crimp right angle connector (non-solder pin), no braid trim – EZ-240-SM-RA-X
TNC Female (jack) crimp connector (non-solder pin), no braid trim – EZ-240-TF-X
TNC-female (jack) bulkhead, crimp connector, non-solder pin, no braid trim – EZ-240-TF-BH-X
TNC-Female (jack) crimp/reverse polarity, non-solder male pin, no braid trim – EZ-240-TF-RP-X
TNC-male (plug) crimp connector, non-solder pin, no braid trim – EZ-240-TM-X
TNC-Male (plug) crimp right angle connector (non-solder pin) no braid trim – EZ-240-TM-RA-X
TNC-Male (plug) crimp, reverse polarity (non-solder pin), no braid trim – EZ-240-TM-RP-X
UHF-male (plug) crimp connector, non-solder pin, no braid trim – EZ-240-UM-X
UHF-male (plug) right angle, crimp connector, non-solder pin, no braid trim – EZ-240-UM-RA-X

Specification

woosvi_sluga:1:{i:0;a:1:{s:4:"imgs";a:2:{i:0;s:5:"20335";i:1;s:5:"20334";}}}

Brand

LMR

LMR™ is recognised as the global brand name of the Industry standard, Flexible, Low Loss Communications Coaxial cable family designed and manufactured by Times Microwave Systems USA. LMR™ is also the brand name for the market leading, Times Microwave Systems range of  high performance coaxial connectors such as the 'TC' and 'EZ' connectors . These connectors are known internationally as the easiest coaxial connectors to terminate to flexible coaxial cables in the industry – with consistent resulting superior broadband Insertion Loss and VSWR performance. LMR™ is a registered trademark of Times Microwave Systems USA.

LMR-LW240-LSZH Data Sheet

Download

No Connectors have been added at this time

No Hardware or Tools have been added at this time