Description
N Male – SMA Male Twin Shotgun Coaxial Cable Assembly
N Male – SMA Male Twin Shotgun Coaxial Cable Assembly (MM-195-SC) is an Ultra-Low Loss, Siamese Cable Assembly, designed as 2 cables moulded together to achieve professional cable runs.
The Twin Shotgun Coaxial Cable Assemblies are designed to be used in conjunction with any cross polarised antenna operating in the frequency of DC-6GHz.
Typically, the Shotgun Coaxial Cable is used to extend a MIMO 3G/4G/5G antenna from the router, in order to increase the height of the antenna.
Why Choose Twin Shotgun Coaxial Cable Assemblies?
Twin Shotgun Series Coaxial Cable Assemblies have excellent reliability, unsurpassed flexibility and ultra-low attenuation. The 195 Shotgun cable is a drop in performance upgrade for RG-58 and RG-142 with additional benefits of achieving a professional and neat cable run.
Twin Shotgun Coaxial Cable Assemblies – Ultra High Performance
The Twin Shotgun Series Coaxial Cable (MM-195-SC) is higher performance than competing RG cables due to the cable construction specifications. The centre conductor uses a high conductivity, Bare copper clad covered aluminium centre conductor material. The dielectric is nitrogen injected, foamed, closed cell, Polyethylene which helps achieve 80% Velocity of Propagation in each cable. The Dielectric has an aluminium foil outer conductor, which is chemically bonded on to it. Due to the cable construction, the attenuation is significantly lower, and VP is higher as compared to single shielded RG coaxial cables.
MM-195-SC =80% VP
RG-58= 66% VP
RG-142= 69% VP
Outer Jacket
Twin Shotgun Coaxial Cable is a UV resistant, UPVC Jacket. This helps to ensure the cable jacket can withstand harsh outside environments and UV rays from sunlight. The PVC jacket allows additional benefits such as more flexibility and ease of separation of the cables when performing connector termination.
Frequency Operating Band
MM-195-SC is designed to operate excellent from DC – 6GHz.
Attenuation vs Frequency (Each Cable) | ||
Frequency MHz | Attenuation (dB/100m) | Avg Power (kW) |
30 | 6.5 | 0.78 |
50 | 8.4 | 0.60 |
150 | 14.6 | 0.35 |
200 | 16.9 | 0.30 |
220 | 17.7 | 0.29 |
450 | 25.6 | 0.20 |
900 | 36.5 | 0.14 |
1500 | 47.7 | 0.11 |
1800 | 52.5 | 0.10 |
2000 | 55.5 | 0.08 |
2500 | 62.4 | 0.07 |
3000 | 68.8 | 0.07 |
Construction Specifications (Each Cable) | ||
Description | Material | Size (mm) |
Inner Conductor | Bare Copper | 0.94 |
Dielectric | Foam PE | 2.80 |
Outer Conductor | Aluminium Tape | 2.90 |
Overall Braid | Tinned Copper Braid | 3.40 |
Jacket | UPVC | 5.00 |
Mechanical Specifications (Each Cable) | ||
Performance Property | Units | Value |
Bend Radius: Installation | mm | 12.7 |
Bend Radius: Repeated | mm | 50.8 |
Weight | kg/m | 0.06 |
Temperature Rating | oC | -40/+85 |
Electrical Specifications (Each Cable) | ||
Description | Unit | Value |
Impedance | ohms | 50 |
Capacitance | pF/m | 80 |
Velocity of Propagation | % | 80 |
Inner Cond Resistance | Ohms/km | 25.3 |
Outer Cond Resistance | Ohms/km | 19.9 |
Shielding Effectiveness | dB | >90 |
Voltage Withstand | Volts DC | 1000 |
Jacket Spark | Volts RMS | 3000 |
Connectors
 ‘TC’ (solder centre pin) Connectors to fit Twin Coaxial Cable | ||
TC-195-NMH-X | N-Male (plug) crimp connector, no braid trim | |
TC-195-NMH-RA-D | N-Male (plug) crimp right angle connector | |
TC-195-SM-SS-X | SMA-Male (plug) crimp connector, no braid trim | |
TC-195-TM-X | TNC-Male (plug) crimp connector; no braid trim | |
LMR-195   ‘EZ’ (non solder centre pin) Connectors to fit Twin Coaxial Cable | ||
EZ-195/200-4310M-X | 4.3/10-male (plug) crimp connector, non-solder pin, no braid trim | |
EZ-195/200-4310M-RA-X | 4.3/10-male (plug) right angle, crimp connector, non-solder pin, no braid trim | |
EZ-195-BM-X | BNC Male (plug) crimp connector, non-solder pin, no braid trim | |
EZ-195/200-716M-X | 7/16-male (plug) crimp connector, non-solder pin, no braid trim | |
EZ-195/200-716M-RA-X | 7/16-male (plug) right angle, crimp connector, non-solder pin, no braid trim | |
EZ-195/200-NF-X | N-female (jack) crimp connector, non-solder pin, no braid trim | |
EZ-195-NF-BH-X | N-female (jack) bulkhead crimp connector, non-solder pin, no braid trim | |
EZ-195-NMH-X | N-male (plug) crimp connector, non-solder pin, no braid trim | |
EZ-195-QF-X | QMA-female (plug) crimp connector, non-solder pin, no braid trim | |
EZ-195-QM-X | QMA-male (plug) crimp connector, non-solder pin, no braid trim | |
EZ-195/200-QNF-X | QN-female (jack) crimp connector, non-solder pin, no braid trim | |
EZ-195/200-QNM-X | QN-male (plug) crimp connector, non-solder pin, no braid trim | |
EZ-195/200-QNM-RA-X | QN-male (plug) right angle, crimp connector, non-solder pin, no braid trim | |
EZ-195/200-SF-X | SMA-female (jack) crimp connector, non-solder pin, no braid trim | |
EZ-195-SM-X | SMA-Male (plug) crimp connector, non-solder pin, no braid trim | |
EZ-195-SM-RA-X | SMA-Male (plug) crimp connector, non-solder pin, right angle, no braid trim | |
EZ-195/200-TF-BH-X | TNC-female (jack) bulkhead, crimp connector, non-solder pin, no braid trim | |
EZ-195-TM-X | TNC-male (plug) crimp connector, non-solder pin, no braid trim | |
EZ-195/200-TM-RA-X | TNC-male (plug) right angle, crimp connector, non-solder pin, no braid trim | |
EZ-195-TF-RP-X | TNC-female (jack) reverse polarity crimp connector, non-solder pin, no braid trim | |
EZ-195-TM-RP-X | TNC-male (plug) reverse polarity crimp connector, non-solder pin, no braid trim | |
EZ-195/200-UM-X | UHF-male (plug) crimp connector, non-solder pin, no braid trim | |
EZ-195/200-UM-RA-X | UHF-male (plug) right angle, crimp connector, non-solder pin, no braid trim |