Description
N Male to N Male RG58 Cable Assembly
The N Male to N Male RG58 Cable Assembly is a Premium Shielded, Indoor/Outdoor, Low Loss, 50 Ohm & Rugged design
This N Male to N Male RG58 Cable Assembly comes as standard with N Type male connectors pre-installed and weatherproofed and is tested for insertion loss and VSWR.
The Premium Shielded RG58 employs an additional shield by using and aluminium tape wrap around the dielectric, this offers better shielding than typical RG58.
Additionally, the outer braid is tinned copper, rather than the traditional bare copper. This contributes to stable loss over a prolonged period of time as the cable material is less affected by moisture than bare copper.
The mechanical properties of the cable such as the solid PE dielectric provides superior crush resistance and therefore is well suited for tactical applications.
The PVC Jacket contributes to excellent flexibility.
There are a wide variety of connectors available for this cable, including all common interface types.
This flexible 50 Ohm coax cable with PVC jacket is rated for 3 GHz maximum operating frequency.
Cable assemblies – The RG58 range can come as fully tested cable assemblies, ready to simply drop in. For an instant quotation on RG58 cable assemblies, simply contact us here.
To View the full range of RG Cable’s, click here.
Other Available RG58 Coaxial Connectors
| RG58 Connector | Abbreviation |
| 4.3/10-male (plug) crimp connector, non-solder pin, no braid trim | 4310M
|
| 4.3/10-male (plug) right angle, crimp connector, non-solder pin, no braid trim
|
4310M-RA
|
| BNC Male (plug) crimp connector, non-solder pin, no braid trim
|
BM |
| 7/16-male (plug) crimp connector, non-solder pin, no braid trim
|
716M |
|
7/16-male (plug) right angle, crimp connector, non-solder pin, no braid trim
|
716M-RA |
| N-female (jack) crimp connector, non-solder pin, no braid trim
|
NF |
| N-female (jack) bulkhead crimp connector, non-solder pin, no braid trim
|
NF-BH |
| N-male (plug) crimp connector, non-solder pin, no braid trim
|
NM |
| QMA-female (plug) crimp connector, non-solder pin, no braid trim
|
QF |
| QMA-male (plug) crimp connector, non-solder pin, no braid trim
|
QM |
| QN-female (jack) crimp connector, non-solder pin, no braid trim
|
QNF |
| QN-male (plug) crimp connector, non-solder pin, no braid trim
|
QNM |
| QN-male (plug) right angle, crimp connector, non-solder pin, no braid trim
|
QNM-RA |
| SMA-female (jack) crimp connector, non-solder pin, no braid trim
|
SF |
| SMA-Male (plug) crimp connector, non-solder pin, no braid trim
|
SM |
| SMA-Male (plug) crimp connector, non-solder pin, right angle, no braid trim
|
SM-RA |
| TNC-female (jack) bulkhead, crimp connector, non-solder pin, no braid trim
|
TF-BH |
| TNC-male (plug) crimp connector, non-solder pin, no braid trim
|
TM |
| TNC-male (plug) right angle, crimp connector, non-solder pin, no braid trim
|
TM-RA |
|
TNC-female (jack) reverse polarity crimp connector, non-solder pin, no braid trim
|
TF-RP |
| TNC-male (plug) reverse polarity crimp connector, non-solder pin, no braid trim
|
TM-RP |
| UHF-male (plug) crimp connector, non-solder pin, no braid trim
|
UM |
| UHF-male (plug) right angle, crimp connector, non-solder pin, no braid trim
|
UM-RA |
N Male to N Male RG58 Specifications
| Construction Specifications | ||
| Description | Material | Size (mm) |
| Inner Conductor | Bare Copper | 0.90mm |
| Dielectric | Solid PE | 2.95mm |
| Outer Conductor | Aluminium Tape | 3.10mm |
| Outer Braid | Tinned Copper | 96*0.12mm |
| Jacket | PVC | 5.00mm |
| Electrical Specifications | ||
| Description | Unit | Value |
| Impedance | ohms | 50 |
| Capacitance | pF/m | 100±5 |
| Velocity of Propagation | % | 66 |
| Max Voltage | VMS | 1,500 |
| Max Frequency | MHz | 3,000 |
| Temperature Range |
| -20/+80C |
| Mechanical Specifications | ||
| Performance Property | Value | Unit |
| Bend Radius (Installation) | 24.89 | Mm |
| Bend Radius (Repeated) | 49.78 | Mm |
| Weight | 0.04 | Kg/m |
| Diameter | 0.195 | Inches |
| Diameter | 4.95 | mm |
| Attenuation vs Frequency | ||
| Frequency MHz | Attenuation | Unit |
| 200 | 24.7 | dB/100m |
| 400 | 35.7 | dB/100m |
| 900 | 51.2 | dB/100m |
| 1800 | 73.5 | dB/100m |
| 2000 | 77.1 | dB/100m |
| 2500 | 89.4 | dB/100m |
| 3000 | 110.6 | dB/100m |
