Twin Siamese Coaxial Cable – Ultra Low Loss 0.100”
Twin Siamese Coaxial Cable (MM-100-SC) is an Ultra Low Loss Extension cable, designed as 2 sperate cables moulded together to achieve professional cable runs.
The Ultra Low Loss Twin Siamese Coaxial Cable is designed to be used in conjunction with any cross polarised antenna operating in the frequency of DC-6GHz.
Typically, the Siamese Coaxial Cable is used to extend a MIMO 3G/4G/5G antenna from the router, in order to increase the height of the antenna.
Why Choose Twin Siamese Series 0.100 Coaxial Cable?
Twin Shotgun Series Coaxial Cable has excellent reliability, unsurpassed flexibility and ultra low attenuation. The 0.100” Shotgun cable is a drop in performance upgrade for RG-316 and RG-178 with additional benefits of achieving a professional and neat cable run.
Twin Siamese Coaxial Cable – Ultra High Performance
The Twin Shotgun Series Coaxial Cable (MM-100-SC) is higher performance than competing RG cables due to the cable construction specifications. The centre conductor uses a high conductivity, Bare copper clad covered aluminium centre conductor material. The dielectric is nitrogen injected, foamed, closed cell, Polyethylene which helps achieve 80% Velocity of Propagation in each cable. The Dielectric has a Aluminium foil outer conductor, which is chemically bonded on to it. Due to the cable construction, The attenuation is significantly lower and VP is higher as compared to single shielded RG coaxial cables.
Twin Shotgun Coaxial Cable is a UV resistant, UPVC Jacket. This helps to ensure the cable jacket can withstand harsh outside environments and UV rays from sunlight. The PVC jacket allows additional benefits such as more flexibility and ease of separation of the cables when performing connector termination.
Frequency Operating Band
MM-100-SC is designed to operate excellent from DC – 6GHz.
|Attenuation vs Frequency (Each Cable)|
|Frequency MHz||Attenuation (dB/100m)||Avg Power (kW)|
|Construction Specifications (Each Cable)|
|Inner Conductor||Bare Copper||0.46|
|Outer Conductor||Aluminium Tape||1.65|
|Overall Braid||Tinned Copper Braid||2.05|
|Mechanical Specifications (Each Cable)|
|Bend Radius: Installation||mm||11.2|
|Bend Radius: Repeated||mm||28|
|Electrical Specifications (Each Cable)|
|Velocity of Propagation||%||66|
|Inner Cond Resistance||Ohms/km||108|
|Outer Cond Resistance||Ohms/km||31.2|
|Voltage Withstand||Volts DC||2000|
|Max Operating Frequency||MHz||3000|