Contact & Support: +44 (0)1592 655428
$0.00
0
Specialist Live Chat
Coaxial Cable Calculator
Enquiry Form
Home  ›  Products  ›  Coaxial Cables  ›  Low PIM Cables  ›  TCOM  ›  TCOM-195-FR
tcom-195-fr

TCOM-195-FR

P.O.A

TCOM-195-FR Coaxial cable is a Fire Retardant, Low PIM, Low Loss coaxial cable with excellent reliability under constant flexing.

Foot
SKU: TCOM-195-FR Category:

Specification

ApplicationGeneral Purpose
Bending Moment ft/lb0.2
Bending moment n-m0.27
Impedance (Ohm)50
JacketFRPE
JacketcolorBlack
Cable Od (in)0.195
Cable Od (mm)4.95
Operating Temp (C)-0.470588235
Operating Temp (F)-0.216216216
Weight kg/m0.05
suffix#NAME?

Description

TCOM-195-FR

TCOM-195-FR cable is an Ultra Flexible, Fire Retardant, Low Loss Communications Coaxial cable, supplied in any length – manufactured by Times Microwave Systems and available from McGill Microwave  – Authorised Distributor of all Times Microwave products.

TCOM-195-FR is a non-halogen (non-toxic), low smoke, fire retardant cable designed for in-building runs that can be routed anywhere except air handling plenums. TCOM-FR has a UL/NEC & CSA rating of ‘CMR’ and ‘FT4’ respectively. The Coaxial cable is a very popular product for applications where repeated flexing is taking place. The construction specifications of the cable have been designed in such a way that provides continuous reliability with continuous flexure.

Additionally, this cable provides Low Passive Inter Modulation (155 dBc Intermodulation Distortion). This cable is therefore an excellent telecommunications cable with the added benefit of unsurpassed reliability.

How is the TCOM-195-FR low loss figures achieved?

This is achieved due to the cable construction specifications. The centre conductor uses a high conductivity, Bare copper clad covered aluminium centre conductor material. The dielectric is nitrogen injected, foamed, closed cell, Polyethylene which helps achieve 76% Velocity of Propagation. There is a Silver Plate Copper Strip Braid over the Dielectric which helps to achieve lower DV resistance and thus keep the insertion loss low. As there is an SPC strip braid, Aluminium Tape and TC Braid, the shielding effectiveness is excellent at >100dB!

Outer Jacket

The TCOM-195-FR comes with a UV resistant, Fire Retardant, Non Halogen, Low Smoke, PE Jacket. This helps to ensure the cable jacket can withstand harsh outside environments and UV rays from sunlight, this is designed to last for up to 20 years of outdoor service.

Frequency Operating Band

TCOM-195-FR is designed to operate excellent from 30 MHz – 10GHz.

 Applications

 TCOM-195-FR is an excellent performing cable for:
  • Wireless Base Station Interconnect
  • Low Loss UHF/Microwave Interconnect
  • Cell’s on Wheels
  • Any application where there may be repeated flexure

Attenuation dB figures per 100m

30 MHz : 5.8 dB
50 MHz : 7.5 dB
150 MHz : 13.1 dB
220 MHz : 16.0 dB
450 MHz : 23.0 dB
900 MHz : 33.0 dB
1500 MHz : 43.1 dB
1800 MHz : 47.5 dB
2000 MHz:  50.2 dB
2500 MHz:  56.5 dB
5800 MHz: 89.1 dB
10,000 MHz: 120.7 dB

Temperature range: -40⁰C – +85⁰C 

Inner Conductor: Solid BC (0.94mm)
Dielectric: Foam PE (2.79mm)
Outer conductor: SPC Strip Braid (3.05mm)
Overall Braid: Tinned copper Braid over Aluminium Tape (3.76mm)
Jacket: Black FRPE (4.95mm)

Mechanical Specifications

Bend Radius: installation 12.7mm
Bend Radius: repeated 50.8mm
Bending Moment: 0.27Nm
Weight lb/ft  0.05Kg/M
Tensile Strength  18.2 Kg
Flat Plate Crush: 0.27 Kg/mm

Connectors

At McGill Microwave systems, we supply a huge range of connectors that include all the common interface modes. The connectors come in EZ style fitment, for rapid solderless assembly or the traditional TC solder type connectors.
TCOM-195-FR    ‘TC’ (solder center pin) Connectors
TC-195-NMH-X N-Male (plug) crimp connector, no braid trim
TC-195-NMH-RA-D N-Male (plug) crimp right angle connector
TC-195-SM-SS-X SMA-Male (plug) crimp connector, no braid trim
TC-195-TM-X TNC-Male (plug) crimp connector; no braid trim
TCOM-195-FR    ‘EZ’ (non solder center pin) Connectors
EZ-195/200-4310M-X 4.3/10-male (plug) crimp connector, non-solder pin, no braid trim
EZ-195/200-4310M-RA-X 4.3/10-male (plug) right angle, crimp connector, non-solder pin, no braid trim
EZ-195-BM-X BNC Male (plug) crimp connector, non-solder pin, no braid trim
EZ-195/200-716M-X 7/16-male (plug) crimp connector, non-solder pin, no braid trim
EZ-195/200-716M-RA-X 7/16-male (plug) right angle, crimp connector, non-solder pin, no braid trim
EZ-195/200-NF-X N-female (jack) crimp connector, non-solder pin, no braid trim
EZ-195-NF-BH-X N-female (jack) bulkhead crimp connector, non-solder pin, no braid trim
EZ-195-NMH-X N-male (plug) crimp connector, non-solder pin, no braid trim
EZ-195-QF-X QMA-female (plug) crimp connector, non-solder pin, no braid trim
EZ-195-QM-X QMA-male (plug) crimp connector, non-solder pin, no braid trim
EZ-195/200-QNF-X QN-female (jack) crimp connector, non-solder pin, no braid trim
EZ-195/200-QNM-X QN-male (plug) crimp connector, non-solder pin, no braid trim
EZ-195/200-QNM-RA-X QN-male (plug) right angle, crimp connector, non-solder pin, no braid trim
EZ-195/200-SF-X SMA-female (jack) crimp connector, non-solder pin, no braid trim
EZ-195-SM-X SMA-Male (plug) crimp connector, non-solder pin, no braid trim
EZ-195-SM-RA-X SMA-Male (plug) crimp connector, non-solder pin, right angle, no braid trim
EZ-195/200-TF-BH-X TNC-female (jack) bulkhead, crimp connector, non-solder pin, no braid trim
EZ-195-TM-X TNC-male (plug) crimp connector, non-solder pin, no braid trim
EZ-195/200-TM-RA-X TNC-male (plug) right angle, crimp connector, non-solder pin, no braid trim
EZ-195-TF-RP-X TNC-female (jack) reverse polarity crimp connector, non-solder pin, no braid trim
EZ-195-TM-RP-X TNC-male (plug) reverse polarity crimp connector, non-solder pin, no braid trim
EZ-195/200-UM-X UHF-male (plug) crimp connector, non-solder pin, no braid trim
EZ-195/200-UM-RA-X UHF-male (plug) right angle, crimp connector, non-solder pin, no braid trim

TCOM-195-FR Data Sheet

Download

TCOM-195-FR Data Sheet

Connectors

Installation Tools

The following Hardware and Installation tools are compatible

  • CCT-02

    CCT-02 Cutting Tool

    Part NumberCCT-02
    Stock Code3192-165

    CCT-02 Cutting Tool

    The CCT-02 cutting tool is designed to give a neat cut to any of the sizes of the below coaxial cables: The Blade is hardened, ensuring there is minimum wear over time.
    Add to Cart
  • CCT-03

    CCT-03 Cutting Tool

    Part NumberCCT-03
    Stock Code3192-267

    CCT-03 Cable Cutting Tool

    The CCT-03 tool is an efficient tool for cutting LMR, TCOM and RG cables having a diameter of LMR-600 or smaller. This tool provides a clean, square cut - leaving the the cable cut perfectly round. This cutting tool has been specially designed with a perfect spring force already built in to the tool to cut the cable. All the user needs to do is simply spin the tool, and it cuts the cable perfectly itself, every time. The Cutting tool comes with hardened blade, that allows 1000’s of cable cuts, with no degradation to the blade.
    Add to Cart
  • cst-195/200

    CST-195/200 Prep Tool

    Part NumberCST-195/200
    Stock Code3192-102
    CST-195/200 Cable Prep Tool
    The CST-195/200 manufactured by Times Microwave Systems and is designed to Strip all variations of LMR-195 and LMR-200 cable. This tool has 3 features: Cable cut (To centre conductor), Jacket stripper and centre conductor deburring tool. There is also an adjustment setting on the stripping tool to allow to cut for Times Microwave LMR Crimp connectors or Clamp connectors. Simply set it to the correct connector type and start stripping. The Cable Prep Tool has replaceable blades however this should not need to be done regularly as the blades have been proven to have a very long lasting life.
    Add to Cart

  • Replacement Blade Kit

    Part NumberRB-CST
    Stock Code3192-086
    Replacement blade kit for all CST cutting tools
    Add to Cart

  • Replacement Blade

    Part NumberRB-02
    Stock Code3192-166
    Replacement blade for cutting tool
     
    Add to Cart