£4.76 EX VAT
TCOM-500 Coaxial cable is a a very popular product for applications where repeated flexing is taking place. The construction specifications of the cable have been designed in such a way that provides continuous reliability with continuous flexure.
| Application | Outdoor |
|---|---|
| Bending Moment ft/lb | 1.75 |
| Bending moment n-m | 2.37 |
| Impedance (Ohm) | 50 |
| Jacket | PE |
| Jacketcolor | Black |
| Cable Od (in) | 0.5 |
| Cable Od (mm) | 12.7 |
| Operating Temp (C) | -0.470588235 |
| Operating Temp (F) | -0.216216216 |
| Weight kg/m | 0.179 |
| suffix | NULL |
TCOM-500 cable is a Flexible Low Loss Communications Coaxial cable, supplied in any length – manufactured by Times Microwave Systems and available from McGill Microwave – Authorised Distributor of all Times Microwave products.
TCOM-500 Coaxial cable is a very popular product for applications where repeated flexing is taking place. The construction specifications of the cable have been designed in such a way that provides continuous reliability with continuous flexure.
Additionally, this cable provides Low Passive Inter Modulation (155 dBc Intermodulation Distortion). This cable is therefore an excellent telecommunications cable with the added benefit of unsurpassed reliability.
This is achieved due to the cable construction specifications. The centre conductor uses a high conductivity, Bare copper clad covered aluminium centre conductor material. The dielectric is nitrogen injected, foamed, closed cell, Polyethylene which helps achieve 86% Velocity of Propagation. There is a Silver Plate Copper Strip Braid over the Dielectric which helps to achieve lower DV resistance and thus keep the insertion loss low. As there is an SPC strip braid, Aluminium Tape and TC Braid, the shielding effectiveness is excellent at >100dB!
The TCOM-500 comes with a UV resistant, PE Jacket. This helps to ensure the cable jacket can withstand harsh outside environments and UV rays from sunlight, this is designed to last for up to 20 years of outdoor service.
TCOM-500 is designed to operate excellent from 30 MHz – 10GHz.
The following Hardware and Installation tools are compatible
| Part Number | CCT-02 |
|---|---|
| Stock Code | 3192-165 |
CCT-02 Cutting ToolThe CCT-02 cutting tool is designed to give a neat cut to any of the sizes of the below coaxial cables: The Blade is hardened, ensuring there is minimum wear over time. | |
| Part Number | CCT-03 |
|---|---|
| Stock Code | 3192-267 |
CCT-03 Cable Cutting ToolThe CCT-03 tool is an efficient tool for cutting LMR, TCOM and RG cables having a diameter of LMR-600 or smaller. This tool provides a clean, square cut - leaving the the cable cut perfectly round. This cutting tool has been specially designed with a perfect spring force already built in to the tool to cut the cable. All the user needs to do is simply spin the tool, and it cuts the cable perfectly itself, every time. The Cutting tool comes with hardened blade, that allows 1000’s of cable cuts, with no degradation to the blade. | |
| Part Number | CST-500 |
|---|---|
| Stock Code | 3192-075 |
CST-500 Cable Prep ToolThe CST-500 manufactured by Times Microwave Systems and is designed to Strip all variations of LMR-500 cable. This tool has 3 features: Cable cut (To centre conductor), Jacket stripper and centre conductor deburring tool. There is also an adjustment setting on the stripping tool to allow to cut for Times Microwave LMR Crimp connectors or Clamp connectors. Simply set it to the correct connector type and start stripping. The Cable Prep Tool has replaceable blades however this should not need to be done regularly as the blades have been proven to have a very long lasting life. | |
| Part Number | Y151 |
|---|---|
| Stock Code | 3190-465 |
| ".532"" Hex Dies" | |
| Part Number | RB-CST |
|---|---|
| Stock Code | 3192-086 |
| Replacement blade kit for all CST cutting tools | |
| Part Number | RB-02 |
|---|---|
| Stock Code | 3192-166 |
Replacement blade for cutting tool
| |
| Part Number | CT-U |
|---|---|
| Stock Code | 3192-181 |
CT-U Crimp ToolTimes Microwave CT-U is a universal crimp tool. The CT-U crimp tool can take different die sizes in order to crimp different sizes of connectors. The CT-U can crimp: | |
